Non-Penetrating Roof Mount Low Profile for Light Antennas

Description

Easy Up EZ NP Non-Penetrating Low Profile Roof Mount
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized steel, uses 6 standard concrete blocks to anchor, 29 x 35.5" base, accepts masts from 1.00 to 1.75 inch O.D...

For light antenna loads needing 10 feet in height, use this mount in combination with (2)EZ 5-16S swaged 1.25" O.D. masts, several EZ 50 turnbuckles, some 620 guy wire and the EZ 43-A Guy Ring! (available separately)

Also can be used as a non-pen base for an H20 or H30 Telescopic mast, though down guys will still be required as per Factory recommendations.

Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere

Mount Accessories

The Video Mount Products Line features Versatile Mounting Options for a Wide Variety of Manufacturers and Models. By Size, here is a quick Application Chart:

Flat Panel Displays

Application	Large (42" - 63")	Mid (25" - 42")	Small (10" - 23")
Flush Wall	PDM-F or FP-LF	LCD-MID-F	LCD-F
Flush Wall / Tilt	PDM-FT	LCD-MID-FT	LCD-FT
Articulating Wall	PDM-W	LCD-2537	LCD-1
Ceiling	PDM-C	LCD-MID-C or LCD 2537C	LCD-1C
Desk	-	-	LCD-2
Dual Wall	-	-	LCD-WM2
Dual Ceiling	-		LCD-CM2
Dual Desk	-	-	LCD-DM2
Equipment Rack	-	-	ER-LCD1017
Pole	-	LCD-PA w/ LCD-2537	LCD-PA w/ LCD-1
Under Cabinet	-	-	LCD-UC1

WARNING: The installer of these products must verify that the mounting surface, ceiling or wall, will safely support the combined weight of all attached equipment and hardware. Video Mount Products will not be held liable for the improper use or installation of its products.

For a Make/Model Specific Application, annex this Tool in Your research:
Video Mount Finder

RSS

Non-Penetrating Roof Mount Low Profile for Light Antennas

Flat Panel Displays

Application

Large (42" - 63")

Mid (25" - 42")

Small (10" - 23")

WARNING: The installer of these products must verify that the mounting surface, ceiling or wall, will safely support the combined weight of all attached equipment and hardware. Video Mount Products will not be held liable for the improper use or installation of its products.