Protective Rubber Mat Layer for Non-Penetrating Antenna Roof Mount

Description

Video Mount FRM-MAT Satellite Dish Roof Mount Rubber Protective Mat
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/32 thick Pad measures roughly 36 wide by 42 inches long, trims neatly, place underneath Frame of Non-Penetrating mount, laid directly upon the roof surface to protect the roof from marring and gouging from the bottom of the Base of the Non-Penetrating Mount steel rail components.

This Non-Penetrating Mount Protective Rubber Mat layer installs under the Steel Framework of the Non-Penetrating Satellite Dish Roof Mount and the Ballast that would keep the Mount and Antenna on target with minimal deviation and flex. As with all Ballast mounts, Structural Engineering consultations are recommended for all Roof Applications.

Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere

Projector Mount

The Video Mount Products Line features Versatile Mounting Options for a Wide Variety of Manufacturers and Models. By Size, here is a quick Application Chart:

Flat Panel Displays

Application	Large (42" - 63")	Mid (25" - 42")	Small (10" - 23")
Flush Wall	PDM-F or FP-LF	LCD-MID-F	LCD-F
Flush Wall / Tilt	PDM-FT	LCD-MID-FT	LCD-FT
Articulating Wall	PDM-W	LCD-2537	LCD-1
Ceiling	PDM-C	LCD-MID-C or LCD 2537C	LCD-1C
Desk	-	-	LCD-2
Dual Wall	-	-	LCD-WM2
Dual Ceiling	-		LCD-CM2
Dual Desk	-	-	LCD-DM2
Equipment Rack	-	-	ER-LCD1017
Pole	-	LCD-PA w/ LCD-2537	LCD-PA w/ LCD-1
Under Cabinet	-	-	LCD-UC1