Sort by:

Flat Roof Non-Pen Mounts

Non-Penetrating Roof Mount Low Profile for masts up to 1.75"

Non-Penetrating Antenna Roof Mount
Price: $79.00
Manufacturer Code: EZ NP-175
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

3 Star Inc. EZ NP Non-Penetrating Low Profile Roof Mount
Made in the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized steel, uses 6 standard concrete blocks to anchor, 29 x 35.5" base, accepts masts from 1.00 to 1.75 inch O.D...

Non-Penetrating Roof Mount Low Profile for masts up to 2.25"

Non-Penetrating Antenna Roof Mount for pipe 1.25 to 2.25
Price: $84.00
Manufacturer Code: EZ NP-225
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

3 Star Inc. EZ NP Non-Penetrating Low Profile Roof Mount
Made in the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized steel, uses 6 standard concrete blocks to anchor, 29 x 35.5" base, accepts masts from 1.5. to 2.25 inch O.D...

Non-Penetrating Roof Mount Hardware only For Masts 1" to 2.25"

3S-FRM-125 Non-Penetrating Roof Mount - With 60 x 1.25" Mast
Price: $84.00
Manufacturer Code: 3S-FRM-HDW
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

    3S-FRM-HDW Non-Penetrating Roof Mount Hardware only For Masts 1" to 2.25"
Made in the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized 12 Gauge steel, uses 6 standard concrete blocks to anchor, 35" x 35" base. Base Hardware only Mast pipe  1" to 2.25" Optional ......

3S-FRM-F125 Non-Penetrating Front Mount

3S-FRM-F125 Non-Penetrating Front Mount
Price: $106.00
Manufacturer Code: 3S-FRM-F125
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

       3S-FRM-F125 Non-Penetrating Front Roof Mount


Made in the 
USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized 12 Gauge steel, uses 6 standard concrete blocks to anchor, 35" x 35" base , for ground and roof top installations

3S-FRM-125 Non-Penetrating Roof Mount - With 60 x 1.25" Mast

3S-FRM-125 Non-Penetrating Roof Mount - With 60 x 1.25" Mast
Price: $104.00
Manufacturer Code: 3S-FRM-125
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

    3S-FRM-125 Non-Penetrating Roof Mount -w- 60" x 1.25" Mast
Made in the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized 12 Gauge steel, uses 6 standard concrete blocks to anchor, 35" x 35" base. Mast pipe length will be 58" actual length for shipping purposes.

3S-FRM-12510 Non-Penetrating Roof Mount - With 120" x 1.25" Mast Pole

3S-FRM-12510 Non-Penetrating Roof Mount - With 120" x 1.25" Mast Pole
Price: $108.00
Manufacturer Code: 3S-FRM-12510
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

    3S-FRM-12510 Non-Penetrating Roof Mount -w- 120" x 1.25" Mast
Made in the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized 12 Gauge steel, uses 6 standard concrete blocks to anchor, 35" x 35" base. Mast pipe will be 2 60" inch length poles for shipping purposes.

3S-FRM-150 Non-Penetrating Roof Mount - With 58" x 1.50" Mast

3S-FRM-150 Non-Penetrating Roof Mount - With 58" x 1.50" Mast
Price: $110.00
Manufacturer Code: 3S-FRM-150
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

       3S-FRM-150 Non-Penetrating Roof Mount -w- 58" x 1.50" Mast
Made in
 the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized 12 Gauge steel, uses 6 standard concrete blocks to anchor, 35" x 35" base. Mast pipe length will be 58" actual length for shipping purposes.

3S-FRM-15010 Non Penetrating Roof Mount - With 114" x 1.50" Mast Pole

3S-FRM-15010 Non Penetrating Roof Mount - With 114" x 1.50" Mast Pole
Price: $115.00
Manufacturer Code: 3S-FRM-15010
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

       3S-FRM-15010 Non-Penetrating Roof Mount -w- 114" x 1.50" Mast
Made in
 the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized 12 Gauge steel, uses 6 standard concrete blocks to anchor, 35" x 35" base. Mast pipe will be 2x 57" poles for shipping purposes.

3S-FRM-166 Non-Penetrating Roof Mount - With 57" x 1.66" Mast

3S-FRM-166 Non-Penetrating Roof Mount - With 57" x 1.66" Mast
Price: $106.00
Manufacturer Code: 3S-FRM-166
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

       3S-FRM-166 Non-Penetrating Roof Mount -w- 57" x 1.66" OD Mast
Made in the 
USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized 12 Gauge steel, uses 6 standard concrete blocks to anchor, 35" x 35" base. Mast pipe length will be 57" actual length for shipping purposes.

3S-FRM-16610 Non Penetrating Roof Mount - With 114" x 1.66" Mast Pole

Non Penetrating Roof Mount - With 114" x 1.66" Mast Pole
Price: $114.00
Manufacturer Code: 3S-FRM-16610
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

       3S-FRM-16610 Non-Penetrating Roof Mount -w-  1.66" O.D. Mast x 114" ( 2  piece )
Made in the 
USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized 12 Gauge steel, uses 6 standard concrete blocks to anchor, 35" x 35" base. Mast pipe will be 2 57" inch length mast poles for shipping purposes.

3S-FRM-200 Non-Penetrating Roof Mount - With 53" x 2.00" Mast

3S-FRM-200 Non-Penetrating Roof Mount - With 53" x 2.00" Mast
Price: $110.00
Manufacturer Code: 3S-FRM-200
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

       3S-FRM-200 Non-Penetrating Roof Mount -w- 53" x 2.00" Mast
Made in the 
USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized 12 Gauge steel, uses 6 standard concrete blocks to anchor, 35" x 35" base. Mast pipe length will be 53" actual length for shipping purposes.

3S-FRM-225 Non-Penetrating Roof Mount - With 50" x 2.25" Mast

3S-FRM-225 Non-Penetrating Roof Mount - With 50" x 2.25" Mast
Price: $109.95
Manufacturer Code: 3S-FRM-225
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

        3S-FRM-225 Non-Penetrating Roof Mount -w- 50" x 2.25" Mast
Made in the 
USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized 12 Gauge steel, uses 6 standard concrete blocks to anchor, 35" x 35" base. Mast pipe length will be 50" actual length for shipping purposes.

Non-Penetrating Roof Mount with 2.375" O.D. by 30" Mast

Non-Penetrating Roof Mount for HughesNet, DirecWAY, STARBAND and Microwave Dishes
Price: $84.95
Manufacturer Code: 3s-FRM-238-30
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

3 Star FRM-238-30 Non-Penetrating Roof Mount with 2.375" O.D. Mast 30" in Length
Ideal for HughesNet, DirecWAY, StarBand Satellite Dish and Microwave Antenna Mounting, is constructed of steel, uses standard concrete blocks as Ballast...

3S-FRM-238 Non-Penetrating Roof Mount - With 60" x 2.38" Mast

3S-FRM-238 Non-Penetrating Roof Mount - With 60" x 2.38" Mast
Price: $114.95
Manufacturer Code: 3S-FRM-238
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

        3S-FRM-238 Non-Penetrating Roof Mount -w- 57" x 2.38" Mast
Made in the 
USA!Made in the USA!
Ideal for DirectWay, StarBand, Microwave and Wireless Internet Antenna mounting, is constructed of pre-galvanized 12 Gauge steel, uses 6 standard concrete blocks to anchor, 35" x 35" base. Mast pipe length will be 60" actual length for shipping purposes.

Non-Penetrating Roof Mount 30" Mast with 2.00" O.D.

FRM-200 Non-Penetrating Roof Mount for WildBlue, DirecTV SLimline and SuperDISH
Price: $126.00
Manufacturer Code: VMP-FRM200
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

VMP FRM200 Non-Penetrating Roof Mount with 2.00" O.D. Mast 30" in Length
Ideal for DirecTV Slimline, AT9, WildBlue and SuperDISH Dish Mounting, is constructed of steel, uses standard concrete blocks as Ballast...

EZ NP-60-125 Non-Penetrating Roof Mount Low Profile for Light Antennas

Non-Penetrating Antenna Roof Mount
Price: $89.45
Manufacturer Code: EZ NP-60-125
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

3 Star Inc. EZ NP-60-125 Non-Penetrating Roof Mount - With 60" - 1.25" Mast
Made in the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized steel, uses 6 standard concrete blocks to anchor, 29 x 35.5" base...

Non-Penetrating Roof Mount Low Profile for Light Antennas

Non-Penetrating Antenna Roof Mount
Price: $94.95
Manufacturer Code: EZ NP-30-166
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

3 Star Inc. EZ NP-30-166 Non-Penetrating Roof Mount - With 30" - 1.66" Mast
Made in the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized steel, uses 6 standard concrete blocks to anchor, 29 x 35.5" base...

Non Penetrating Roof Mount Low Profile for Light Antennas

Non-Penetrating Antenna Roof Mount
Price: $99.95
Manufacturer Code: EZ NP-60-200
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

3 Star Inc. EZ NP-50-2.00 Non-Penetrating Roof Mount - With 60" - 2.00" Mast
Made in the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized steel, uses 6 standard concrete blocks to anchor, 29 x 35.5" base...

Non-Penetrating Roof Mount Low Profile for Light Antennas

Non-Penetrating Antenna Roof Mount
Price: $109.95
Manufacturer Code: EZ NP-60-225
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

3 Star Inc. EZ NP-60-225 Non-Penetrating Roof Mount - With 50" - 2.25" Mast
Made in the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized steel, uses 6 standard concrete blocks to anchor, 29 x 35.5" base...

Non-Penetrating Roof Mount 60" Mast with 1.25" O.D.

Non-Penetrating Roof Mount 60" Mast with 1.25"O.D.
Price: $131.00
Manufacturer Code: VMP-FRM125
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

VMP FRM125 Non-Penetrating Roof Mount with 1.25" O.D. Mast 60" in Length
Ideal for Off-Air TV and Wireless Internet Antenna mounting, is constructed of Powder Coated Steel steel, uses standard concrete blocks to anchor...

Non-Penetrating Roof Mount 30" Mast with 1.66" O.D.

Non-Penetrating Roof Mount for Dish Network and DirecTV Dish Mounting
Price: $99.56
Manufacturer Code: VMP-FRM166
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

VMP FRM166 Non-Penetrating Roof Mount with 1.66" O.D. Mast 30" in Length
Universal Dish Mount Sized and is constructed of steel, uses standard concrete blocks for Ballast...

Non-Penetrating Roof Mount FRM200 to FRM238 Adapter

Non-Penetrating Roof Mount FRM200 to FRM238 Adapter
Price: $17.00
Manufacturer Code: VMP-FRMA
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

 

VMP FRMA Non-Penetrating Roof Mount FRM200 to FRM238 Adapter
Converts the FRM200 2.00 inch OD mast pipe to a 2.375 inch OD Mount ideal for HughesNet, DirecWAY, StarBand Satellite Dish and Microwave Antenna Mounting, is constructed of steel, uses standard concrete blocks as Ballast...

 

ROHN FRM125 Non Penetrating Roof Mount FRM125

ROHN FRM125 Non Penetrating Roof Mount
Price: $158.00
Manufacturer Code: FRM125
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

ROHN FRM125 Non-Penetrating Roof Mount 1.25 x 60 inch Mast
Made in the USA!Made in the USA!
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount and mast tube are 16 gauge Pre-Galvanized for corrosion protection.

ROHN FRM150 Non Penetrating Roof Mount FRM150

ROHN FRM150 Non Penetrating Roof Mount
Price: $157.00
Manufacturer Code: FRM150
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

ROHN FRM150 Non-Penetrating Roof Mount 1.50 x 30 inch Mast
Made in the USA!Made in the USA!
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount and mast tube are 16 gauge Pre-Galvanized for corrosion protection.

ROHN FRM166 Non Penetrating Roof Mount FRM166

ROHN FRM166 Non Penetrating Roof Mount
Price: $136.00
Manufacturer Code: FRM166
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

ROHN FRM166 Non-Penetrating Roof Mount 1.66 x 30 inch Mast
Made in the USA!Made in the USA!
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount and mast tube are 16 gauge Pre-Galvanized for corrosion protection.

ROHN FRM225 Non Penetrating Roof Mount R-FRM225

ROHN FRM225 Non Penetrating Roof Mount
Price: $156.00
Manufacturer Code: FRM225
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

ROHN FRM225 Non-Penetrating Roof Mount 2.25 x 60 inch Mast
Made in the USA!
Made in the USA!
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount is 16 gauge Pre-Galvanized and the mast tube is thick-walled galvanized steel for corrosion protection.

ROHN FRM238 Non Penetrating Roof Mount R-FRM238

ROHN FRM238 Non Penetrating Roof Mount
Price: $162.00
Manufacturer Code: FRM238
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

ROHN FRM238 Non-Penetrating Roof Mount 2.375 x 30 inch Mast
Made in the USA!Made in the USA!
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount is 16 gauge Pre-Galvanized and the mast tube is thick-walled galvanized steel for corrosion protection.

ROHN FRM238SP5 Non Penetrating Roof Mount FRM238SP5

ROHN FRM238SP5 Non Penetrating Roof Mount
Price: $198.00
Manufacturer Code: FRM238SP5
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

ROHN FRM238SP5 Non-Penetrating Roof Mount 2.375 x 60 inch Mast
Made in the USA!Made in the USA!
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount is 16 gauge Pre-Galvanized and the mast tube is thick-walled galvanized steel for corrosion protection.

3S-JRM20010 Non Penetrating Ballast Roof Mount

R-JRM20010 Non Penetrating Roof Antenna Mount
Price: $489.00
Manufacturer Code: 3S-JRM20010
Average Rating: 5
Availability: Ships out in 2 -3 days!
Stock Level: 1
Qty:

3S JRM20010 Non Penetrating Ballast Roof Mount 2.375 in. x 10 ft. Mast
Made in the USA!Made in the USA!
Mast Dimensions - 2“ STD. Pipe (2-00 O.D.) x 120”
The JRM is a non-penetrating, 5' square ballast type roof mount supporting a 10’ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications.
This Item Ships LTL Freight ONLY...

ROHN JRM23805 Non Penetrating Ballast Roof Mount R-JRM23805

ROHN R-JRM23805 Non Pentrating Roof Antenna Mount
Price: $435.00
Manufacturer Code: JRM23805
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

ROHN JRM23805 Non Pentrating Ballast Roof Mount 2.375 in. x 5 ft. Mast
Made in the USA!Made in the USA!
Mast Dimensions - 2“ STD. Pipe (2-3/8 O.D.) x 60”
The JRM is a non-penetrating, 5' square ballast type roof mount that supports a 5’ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications.
This Item Ships LTL Freight ONLY...

ROHN JRM23855 Non Penetrating Ballast Roof Mount R-JRM23855

ROHN R-JRM23855 Non Pentrating Roof Antenna Mount
Price: $546.00
Manufacturer Code: JRM23855
Average Rating: 5
Availability: Ships out in 2 -3 days!
Qty:
Add to Cart View Cart

ROHN JRM23855 Non Pentrating Ballast Roof Mount 2.375 in. x 10 ft. Mast
Made in the USA!Made in the USA!
Mast Dimensions - 2“ STD. Pipe (2-3/8 O.D.) x 120” ( 2 Piece Mast 2 3/8 x 60" )
The JRM is a non-penetrating, 5' square ballast type roof mount that extends to a 10’ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications.
This Item Ships LTL Freight ONLY...

ROHN JRM23810 Non Penetrating Ballast Roof Mount R-JRM23810

ROHN R-JRM23810 Non Pentrating Roof Antenna Mount
Price: $532.00
Manufacturer Code: JRM23810
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

ROHN JRM23810 Non Pentrating Ballast Roof Mount 2.375 in. x 10 ft. Mast
Made in the USA!Made in the USA!
Mast Dimensions - 2“ STD. Pipe (2-3/8 O.D.) x 120”
The JRM is a non-penetrating, 5' square ballast type roof mount supporting a 10’ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications.
This Item Ships LTL Freight ONLY...

ROHN JRM27505 Non Penetrating Ballast Roof Mount R-JRM27505

ROHN R-JRM27505 Non Pentrating Roof Antenna Mount
Price: $465.00
Manufacturer Code: JRM27505
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

ROHN JRM27505 Non Pentrating Ballast Roof Mount 2.875 in. x 5 ft. Mast
Made in the USA!
Made in the USA!
Mast Dimensions - 2.5“ STD. Pipe (2-7/8 O.D.) x 60”
The JRM is a non-penetrating, 5' square ballast type roof mount that supports a 5’ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications.
This Item Ships LTL Freight ONLY...

ROHN JRM27555 Non Penetrating Ballast Roof Mount R-JRM27555

ROHN R-JRM27555 Non Pentrating Roof Antenna Mount
Price: $545.00
Manufacturer Code: JRM27555
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart

ROHN JRM27555 Non Pentrating Ballast Roof Mount 2.875 in. x 10 ft. Mast ( 2 Piece )


Made in 
the USA!Made in the USA!
 Mast Dimensions - 2.5“ STD. Pipe (2-7/8 O.D.) x 120” ( 2 Piece Mast 2 7/8 x 60"
The JRM is a non-penetrating, 5' square ballast type roof mount supporting a 10’ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications.
This Item Ships LTL Freight ONLY...

ROHN JRM27510 Non Penetrating Ballast Roof Mount R-JRM27510

ROHN R-JRM27510 Non Pentrating Roof Antenna Mount
Price: $558.00
Manufacturer Code: JRM27510
Average Rating: 5
Availability: Ships out in 2 -3 days!
Qty:
Add to Cart View Cart

ROHN JRM27510 Non Pentrating Ballast Roof Mount 2.875 in. x 10 ft. Mast
Made in the USA!Made in the USA!
Mast Dimensions - 2.5“ STD. Pipe (2-7/8 O.D.) x 120”
The JRM is a non-penetrating, 5' square ballast type roof mount supporting a 10’ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications.
This Item Ships LTL Freight ONLY...

ROHN JRM35010 Non Penetrating Ballast Roof Mount R-JRM35010

ROHN R-JRM35010 Non Pentrating Roof Antenna Mount
Price: $588.00
Manufacturer Code: JRM35010
Average Rating: 5
Availability: Ships out in 2 -3 days!
Qty:
Add to Cart View Cart

ROHN JRM35010 Non Pentrating Ballast Roof Mount 3.5in.O.D. x 10 ft. Mast
Made in the USA!
Made in the USA!
Mast Dimensions - 3“ STD. Pipe (3-1/2 O.D.) x 120”
The JRM is a non-penetrating, 5' square ballast type roof mount supporting a 10’ pipe mast with up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, broadband and other applications.
This Item Ships LTL Freight ONLY...

ROHN BRM42510 Non Penetrating Roof Antenna Mount R-BRM42510 2.38 Mast

ROHN BRM42510 Non Pentrating Roof Antenna Mount
Price: $834.00
Manufacturer Code: BRM42510
Average Rating: 5
Qty:
Add to Cart View Cart

ROHN BRM42510 Non-Penetrating Roof Mount 2.38 inch x 10 foot Mast
Made in the USA!Made in the USA!
Mast Dimensions - 2” STD. Pipe (2.38O.D.) x 10'
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 6' - 6" square with a 16” tray to fit concrete blocks, typically used as ballast.
This Item Ships LTL Freight ONLY...

Flat Roof Non-Pen Mounts

Flat Roof Non-Penetrating Mounts

These mounts can be used where penetrating its attachment is not an option. Non penetrating mounts use a balasest like your usual cement cinder block as a method to hold down your masting structure. They can help meet the variety of communication tower needs such as Cellular, PCS, Wireless Cable, Microwave, Wireless Internet, WiFi Hot Spots, DBS, MDS, MMDS and UHF/VHF reception.

Designed and engineered to handle the job of getting above ground interference, each non-penetrating roof mount has been researched and developed to serve a specific purpose.

With professionally engineered construction, you can be assured you're getting a virtually maintenance-free product built to the highest standards. And because our non-penetrating roof mounts are hot-dip galvanized after fabrication, our mounts won't rust.

    Additional Features Include
  • Offer both Fixed Mounts and Ballast Roof Mounts
  • Pre-Galvanized for corrosion protection
  • Varied mast heights available
  • Varied mast pipe O.D. available
  • Quickly shipped and quickly assembled
  • Minimum bolted connections
  • Engineering ballast tables available
  • Optional roof pads and mats available
  • All models are UPS shippable
Online Orders Only

New Store to Open 2023
Three Star Inc.
5750 Stuart Ave.
Jacksonville, FL 32254

Your Orders are Currently being Processed and Shipped out of Richmond, VA.

My Cart
Credit Cards Taken
Your shopping cart is empty!