Printer View Tell a Friend

ROHN 55G 10 Foot Self Supporting Tower 55SS010


Hot Dip Galvanized
Double Bolted Joints
Zig-Zag Rod Bracing
1-1/4" Steel Tubing
Side Rails
17" Equalateral
Triangular Design
Can be used in:
Self Support Config

Bulk Quantities Available Here!

Price: $998.00
Manufacturer Code: 55SS010
Shipping: Can ship anywhere

ROHN 55SS010 Complete 10 Foot Self Supporting Tower

This Product Order Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a Self Supporting 10 Foot ROHN 55G Tower with EPA's (Effective Projected Area) Ratings for 70, 80 or 90 MPH (No Ice). Refer to Brochure on the MORE INFO section of this page for Ice Loading and EPA Information.



1 APL55G Top Beacon Plate for 55G
1 55G 10' Tower Section
1 55JBK Bolt Kit for 55G Tower Section
1 SB55G 5' Base Section
1 ACWS Anti-Climb Warning Sign

Tower Base Grounding Kit

This Kit Includes:

(1) 10' of #4 Copper Wire

(1) 5/8" x 8' Gopper Clad Ground Rod

(1) 5/8" Ground Rod Clamp

(1) 1 1/4" to 2" J-Clamp (For 55G/65G Section Tubular Rail)


The BGK2G Grounding Kit is an OPTIONAL kit for the ROHN 55G "Self-Supporting" Tower Series.


This 55G Tower is to be used in a Self-Supporting Configuration according to Use and Foundation Specifications in the ROHN Catalog. This Height Configuration relies on a SB55G Embedded in a Concrete Foundation Specified by Engineering. As a Free-Standing, Self-Supporting Structure, a 70 MPH rated 55G Tower can rise to a maximum of 60 feet. Refer to  ROHN 55G Specification Sheet  for more ROHN 55G Tower Configuration, Foundation and Grounding Detail Information.


This Item Ships LTL Freight ONLY...



This has become the New Standard of Wireless Internet, Utility Line Telemetry, Business Radio, E911 and Local Area Broadcast Communications Tower due to its compact footprint versus height requirements and wind loading. any structure greater than 10 ft requires a climber safety device

Specification Sheet
Spec Sheet
ROHN 55G 10 Foot Self Supporting Tower R-55SS010 ROHN 25G 45G 55G 65G Universal Side Arm Mount - SA253UA - $225.00

ROHN SA253UA Universal Side Arm Antenna Mount for 25G 45G 55G 65G Tower
Double Side Arm Mounts for lightweight broadband, scada and two-way antennas. Fits 25G, 45G, 55G and 65G towers. Extends 3' off the tower with 2.25 inch O.D. Pipe...

Read More
ROHN 55G 10 Foot Self Supporting Tower R-55SS010 ROHN 55G Tower Face 2.375 inch O.D. Dish Mount R-DM55G2 - $295.00

ROHN DM45G2 Tower Top 2.375 inch O.D. Dish Mount
Face Mount includes 2 Angled Steel Cross-Members that Bolt directly to any of the 3 Faces of a Standard 55G Tower Section. 5 Foot x 2 inch STD (2-3/8 inch O.D.) Pipe connects with U-bolts to 55G Tower Section Brackets...

Read More
ROHN 55G 10 Foot Self Supporting Tower R-55SS010 ROHN 55G Tower Face 4.5 inch O.D. Dish Mount R-DM554 - $420.00

ROHN DM554 Tower Top 4.5 inch O.D. Dish Mount
Face Mount includes 2 Angled Steel Cross-Members that Bolt directly to any of the 3 Faces of a Standard 55G Tower Section. 5 Foot x 4 inch STD (4.5 inch O.D.) Pipe connects with U-bolts to 55G Tower Section Brackets...

Read More
ROHN 55G 10 Foot Self Supporting Tower R-55SS010 ROHN 55G Tower Work Platform Attachment R-WP55G - $332.00

ROHN WP55G 55G Tower Work Platform Platform
Snaps into place at any level. No bolts required...

Read More
ROHN 55G 10 Foot Self Supporting Tower R-55SS010 ROHN 55G Tower Safety Ring Attachment R-SR55 - $778.50
ROHN SR55 55G Tower Safety Ring Attachment
Snaps into place at any level. No bolts required. ...

Read More
ROHN 55G 10 Foot Self Supporting Tower R-55SS010 ROHN Tower ACWS Anti-Climb Warning Sign - ACWS - $38.00

ROHN ACWS Anti Climb Warning Sign
The same Anti Climb Warning Assembly Kit from the ROHN Factory for placement on new tower installations and replacement on existing tower sites where the sign and sticker have faded due to exposure. One of the items on your yearly checklist...

Read More
ROHN 55G 10 Foot Self Supporting Tower R-55SS010 ROHN Bolt Kit for Joining 55G Tower Section R-55JBK - $14.95

ROHN R-55JBK Bolt Kit for 55G Tower Section
Factory OEM, Original Manufacturer's Bolt Kit in Plastic Package as would be Supplied with New Tower Section. Hot Dip Galvanized Grade 5 bolts with nuts ...

Read More
ROHN 55G 10 Foot Self Supporting Tower R-55SS010 ROHN 45G/55G Tower 50 Foot Climbing Safety Cable System R-TT0504555 - $558.00

ROHN TT0504555 50 Foot 45G/55G Tower Climbing Safety Cable System
The Tower installed Component of the TUF TUG Safety System. With enough fixtures and climbing cable to install on Towers up to 50 foot in height. Does not include Harness or Wire Grab...

Read More
Product isn't rated yet. Write a review.

The Self-Supporting G-Series Towers offer an easy, low-cost solution to get light weight antennas in the air quickly. By using the G-Series tower as a self-supporting structure, you minimize land area usage. They are functional in a wide variety of wind speeds, with and without ice. See ROHN´s standard design to help identify the right structure for your project. Theses are the same sturdy, robust tower sections that ROHN has fabricated for years. Each larger model allows for more loading capacity.

 Wind Loading, Antenna Loading and Wind Survivability ratings vs. Height Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a susbstitution for Engineering Conducted Specific to your Application. Contact Us with any Questions you may have regarding Use prior to Purchase. All Information regarding the ROHN 55G Tower line, Parts and Accessories is as accurate and complete as we can possibly provide given that this Resource Offering is subject to change without Notice and is beyond Our Control.



ROHN Self Supporting Tower Rev.F

ROHN Self Supporting Tower Rev.G

Tower designs are in accordance with approved national standard ANSI/EIA-222-F.
2. All towers must have "fixed" bases. Pinned bases may not be used.
3. Designs assume transmission lines symmetrically placed as follows:
25G Tower - One 5/8" Line on each face ( Total =3)
45G Tower - One 7/8" Line on each face ( Total = 3 @ 7/8" & 3 @ 1/2")
55G & 65G Towers - Two 7/8" Lines on each face ( Total =6)
4. Antennas and mounts assumed symmetrically placed at tower apex.
5. Allowable antenna areas assume all round antenna members.
6. Allowable flat-plate antenna areas, based on EIA RS-222-C, may be obtained by multiplying areas shown by 0.6.
7. Standard foundation designs are based on Rev. F normal soil and Rev. G presumptive clay soil parameters. .

Completely hot-dip galvanized after fabrication to provide absolute corrosion protection.
o Cross bracing is formed by a continuous solid rod bracing in a zig-zag pattern for strength.
o Pre-engineered loading charts meet varying individual specs and site conditions.
o Typical uses include small dishes, broadband, security and two-way communication.

ROHN 25G Buyers Guide

ROHN G-Series Self Supporting Towers

Get Adobe Reader

This ROHN G-Series Self Supporting Towers Guide will answer many questions you may have on this Product Line.




a) The intended purpose of these guidelines is to assist the customer and/or owner to retain the services of a Geotechnical Engineer.

b) It is not ROHN´s purpose or intent to supercede the Geotechnical Engineer´s knowledge, judgement and/or experience. It is the Geotechnical Engineer´s responsibility to add or delete from these items, based on local site conditions and other factors.

c) Additional information is provided in ANSI/TIA-222-G Annex G "Geotechnical Investigations".


a) ROHN will not accept any liability, either expressed or implied, for the use of, and omissions in, these guidelines.


a) Borings should be taken at tower legs for self-supporting towers and at the base and anchor points for guyed towers. For small self-supporting towers, two borings may suffice. For large self-supporting towers, one boring should be taken at each tower leg. A "small" self-supporting tower is assumed to have a face width less than 20 feet and a compression load less than 50 kips per leg. For pole structures, one boring may suffice.

b) The minimum boring depth should be 30 feet for pole structures, self-supporting towers and guyed tower bases. For guyed tower anchors, the minimum depth should be 15 feet. The actual depth of boring must be determined by the Geotechnical Engineer based on reactions, soil conditions and the type of foundation recommended.

c) If borings cannot be advanced to the desired depth, rock corings should be taken. Rock Quality Designation (RQD) values and compressive strengths should be determined.


a) The following properties, for each soil layer encountered, should be determined by field or laboratory testing and summarized in the geotechnical report:

1. Soil classification and elevations
2. Standard penetration values
3. Unconfined compression strength
4. Angle of internal friction
5. Cohesion
6. "In-Situ" soil density and moisture content
7. Rock quality designation (RQD) and percent rock sample recovered
8. Other properties unique to site conditions

b) The following items should be discussed in the geotechnical report:

1. Geological description of site
2. Observed and expected ground water conditions
3. Expected frost penetration depth
4. Corrosion potential of soil and corrosion protection recommendations
5. Site access and potential construction difficulties
6. Dewatering or site drainage requirements
7. Backfill material recommendations
8. Settlement considerations
9. Additional information to aid foundation designer
10. Recommended types of foundations
11. Design parameters for uplift, download and lateral load
12. Factor of safety considered when allowable vs. ultimate design parameters are provided
13. Recommended construction techniques and inspections

Products   Recently Viewed
My Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!