Printer Friendly Tell a Friend

VHF/UHF/FM Variable Gain TV Antenna Signal Amplifier | Up to 25dB Gain

Bandwidth: 47-1000MHz
Maximum Input: VHF: 40dBmV / UHF: 20dBmV 
Adjustable Gain: VHF: 25dB UHF: 21dB
Noise Figure: VHF: 6dB UHF: 8dB
Gain Control: 10dB
Power Consumption: approximately 2.4W
Power Requirements: 117VAC 60Hz or 220VAC
Heavy Metal Housing
Power indicator Light
Price: $29.47
Manufacturer Code: SKY38323
Availability: Usually ships in 24 Hrs

Skywalker's Signature Series 25dB Amplifier VHF/UHF/FM with variable gain

Too much gain can be just as bad, as not enough. With this three band amplifier you have the ability to make your gain adjustments just right. With an adjustable gain control, giving you up to 25dB of gain in the VHF, 22dB in the UHF and 18dB in the FM Band! This Signature Series 25dB Amplifier is powered by 120 volt mains AC that  easily plugs into any standard outlet. All cable connections are also the standard F type. This amp also features an on/off light to take the guess work out of it's current operational status. That's not all, it's tough on noise and interference because of its heavy metal housing and solid construction.

Note: If you are adding a couple HD Ready TV sets to your TV Antenna Hook-up, this amp will will work fine to offset any loss that is encountered when adding a splitter to feed the additional Outlets. In addition, it comes with an adjustable Gain control, so you can find that sweet spot. Then when you add more loss to the system you have some gain for future additions and a signal Splitter, or balance the amplifier out to feed another amp at the other end of a cable segment to extend your systems reach to another building. It is Forward only (54-1000 MHz), which matches the Bandwidth of any TV Antenna System, however it will not pass any return signals from internet cable modems or Pay Per View Converter Boxes. 
Check Your Picture quality where the Cable TV feed enters your Home, if it's good there, you can replace connectors, cable and Splitter to bring your installation up to the newest specifications. If you are feeding numerous TV sets or long Distances, use this Amplifier before the Splitter Or long cable run to maintain Signal Quality.
Specification Sheet
Maximum Input
VHF 40dB MV / UHF 20dB MV
VHF 25dB / UHF 21dB
Noise Figure
VHF 6dB / UHF 8dB
Gain Control
Power Consumption
approximately 2.4 watts
Power Requirements
117VAC 60Hz or 220VAC
Main Housing Dimensions
5.5in L x 3.25in W x 1.5in H
End Mount Tab to End Mount Tab
Height from bottom of housing to top of "F" connectors
Product isn't rated yet. Write a review.

Your Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!