ROHN D1130 Tower Side Arm Mount
  Made in USA - Antenna side mount kit. Fastens with Saddle Clamps. Projects your mast held in the clamp (up to 2.00 inches in Diameter with bolts supplied) to distance of 61"-73" inches from the tubular side rail of the tower face to which it is attached...

ROHN 65G APL4HA Leg Mounted  Beacon Plate
Top Plate and Beacon Mount for 65G, 5N and 6N Tower Sections...

 

 

ROHN S24HUM Straight Leg Dish Mount (2.38" - 4.50" OD)The Rohn S24HUM straight leg dish mount fit round leg sizes 2-3/8"O.D.  - 4-50" O.D. , for easy mounting of antennas, mounts and other appurtenances ....

 

 

ROHN S56HUM Straight Leg Dish Mount (5.50" - 6.63" OD)

This Rohn straight leg dish mount fit round leg sizes 5.50"O.D. - 6.63" O.D. , for easy mounting of antennas, mounts and other appurtenances ....

Rohn SA324A  3 Ft Side Arm Mount  Straight or Tapered 2.3765 - 4.5" Legs  with 2.375" Pipe

 

3' Side arm mount for Straight or Tapered Towers with 2.376" -4.5" O.D tower leg, with 2.38" O.D x 5' long mounting pipe....

Rohn SA356A  3 Ft Side Arm Mount  Straight or Tapered 5.5" Legs  with 2.375" Pipe

3' Side arm mount for Straight or Tapered Towers with 5.5" O.D tower leg, with 2.38" O.D x 5' long mounting pipe....

Rohn SA624A  6 Ft Side Arm Mount  Straight or Tapered 2.376" Legs  with 2.375" Pipe

6' Side arm mount for Straight or Tapered Towers with 2.376" O.D tower leg, with 2.38" O.D x 5' long mounting pipe....

Rohn SA656A  6 Ft Side Arm Mount  Straight or Tapered 5.5" Legs  with 2.375" Pipe

6' Side arm mount for Straight or Tapered Towers with 5.5" O.D tower leg, with 2.38" O.D x 5' long mounting pipe....

ROHN SA324A Universal 3Straight/Tapered' Side Arm Antenna Mount 
Double Side Arm Mounts for WISP , broadband, scada and two-way antennas. Fits RT Light , Medium & Heavy  towers. Extends 3' off the tower - For tower legs  2.38 to 4.50" inch O.D. ...

 

ROHN KY2041A G Series Waveguide Bracket
The 3-hole waveguide bracket is used to secure cable lines to the legs of standard ROHN G-series tower sections. The hot-dip galvanized brackets feature (3) 7/16 and (3) 3/4 holes and can be mounted to 3/4 - 2 1/4 legs. It is recommended that (5) KY2041A be used per 20ft of tower for 4ft OC spacing...

RohnJack  G Series Tower Assembly & Disassembly Tool
This is the Complete "Gin Pole" for Lifting one 25G or 45G Tower Section at a time. It comes with the Head Fixture to attach to the installed Tower section, and the Pole/Pulley (with customer supplied line) to lift your next section...

ROHN CW4S #4 Solid Copper Wire
10 feet of #4 Solid Copper wire clamped to ROHN Tower bases for attachment to ground rod in REV. F grounding kits and arrays. Priced and sold by the foot in continuous roll (10 ft. per unit ordered)...

SSV 6NABDST Anchor Bolt Assembly

Rohn SSV 6NABDST anchor bolt assembly is installed when SSV  tower section 6N,7N,8N,9N & 9NH  is used 

SSV SHORT BASE SB2

Rohn SSV SB2 short base installed with tower section 2N

SSV SHORT BASE SB3

Rohn SSV SB3 short base installed with tower section 3

SSV SHORT BASE SB4

Rohn SSV SB4 short base installed with tower section 4 is used 

SSV SHORT BASE SB5

Rohn SSV SB5 short base is installed when SSV  tower section 5 is used 

ROHN NL10 10 Foot Standard Ladder

ROHN HL162A 20 Foot Heavy Duty Ladder

ROHN NL20 20 Foot Standard Ladder

 

 

ROHN S24HUM Straight Leg Dish Mount (2.38" - 4.50" OD)The Rohn S24HUM straight leg dish mount fit round leg sizes 2-3/8"O.D.  - 4-50" O.D. , for easy mounting of antennas, mounts and other appurtenances ....

 

 

ROHN S56HUM Straight Leg Dish Mount (5.50" - 6.63" OD)

This Rohn straight leg dish mount fit round leg sizes 5.50"O.D. - 6.63" O.D. , for easy mounting of antennas, mounts and other appurtenances ....

Rohn SA324A  3 Ft Side Arm Mount  Straight or Tapered 2.3765 - 4.5" Legs  with 2.375" Pipe

 

3' Side arm mount for Straight or Tapered Towers with 2.376" -4.5" O.D tower leg, with 2.38" O.D x 5' long mounting pipe....

Rohn SA356A  3 Ft Side Arm Mount  Straight or Tapered 5.5" Legs  with 2.375" Pipe

3' Side arm mount for Straight or Tapered Towers with 5.5" O.D tower leg, with 2.38" O.D x 5' long mounting pipe....

Rohn SA624A  6 Ft Side Arm Mount  Straight or Tapered 2.376" Legs  with 2.375" Pipe

6' Side arm mount for Straight or Tapered Towers with 2.376" O.D tower leg, with 2.38" O.D x 5' long mounting pipe....

Rohn SA656A  6 Ft Side Arm Mount  Straight or Tapered 5.5" Legs  with 2.375" Pipe

6' Side arm mount for Straight or Tapered Towers with 5.5" O.D tower leg, with 2.38" O.D x 5' long mounting pipe....

ROHN KY2041A G Series Waveguide Bracket
The 3-hole waveguide bracket is used to secure cable lines to the legs of standard ROHN G-series tower sections. The hot-dip galvanized brackets feature (3) 7/16 and (3) 3/4 holes and can be mounted to 3/4 - 2 1/4 legs. It is recommended that (5) KY2041A be used per 20ft of tower for 4ft OC spacing...

SSV 1W SSV Standard 20' Straight Section

SSV Standard 20' Section .....

SSV 1WB SSV Standard Section

SSV Standard 10' Section .....

SSV 2W SSV Tapered 20'  Section

SSV Standard Tapered 20' Section .....

SSV 2WB SSV Standard Straight Section

SSV Standard Straight 10' Section .....

SSV 2WST SSV Standard 20' Straight Section

SSV Standard 20' Section .....

SSV 3WNB SSV Standard Straight Section

SSV Standard Straight 10' Section .....

SSV 2W SSV Tapered 20'  Section

SSV Standard Tapered 20' Section .....

ROHN BGK3G Tower Base Section Grounding Kit
Primarily for 25G and 45G REV. F Towers. Comprises enough material to ground at 1 Tower section joint bolt location. Consists of (10') of #4 Solid Copper Wire, (1) 5/8"x8' Ground Rod, (1) Rod Clamp (1) 5/16 x 2-3/8 G5 HDG Bolt, (1) 5/16 Hex HDG Nut, (1) Hy-Lug YA4C-L4 Compression Terminal Lug...

ROHN LRCL 5 Foot 5/8" Copper Clad Lightning Rod
5 foot by 5/8 inch copper clad Lightning Rod for Tower installation, threaded with nuts. Installs on most Tower Series Top/Beacon Plates and attachments made for this purpose...