Call: (407) 944-8856

EZ TM-50-5U Telescopic Antenna Push Up TV & Wireless Internet Antenna Mast

3 Star Inc. EZ TM-50-5U 20 Foot Telescoping Mast 5 Foot Shipping Length

Made in the USA!

5 section 16 gauge inner, 18 gauge outers, Mast collapses down to 61 inches in length that with overlapping, extended mast length is 20'-10", Used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas (not included)...

Mast Section Dimensions are:
(1) 60" length x 1.25" O.D. (16 AWG)
(2) 59" length x 1.50" O.D. (18 AWG)
(3) 56" length x 1.75" O.D. (18 AWG)
(4) 53" length x 2.00" O.D. (18 AWG)
(5) 50" length x 2.25" O.D. (18 AWG)

All Masts are pre-galvanized for corrosion protection and comes assembled with hardware .

This Item Ships UPS Brown!

Note:

Installation Guidelines:

Installation or dismantling of telescoping masts require professional contractors experienced with guyed masts.
All installations must be bracketed or guyed.
The pictured guy wire kit layouts are for a typical installation. Individual installation requirements may vary.
Antenna load (top load) should not exceed an effective projected area (EPA) of 2 square feet (see your antenna specifications).

Specification Sheet

Install Sheet

Installations

height

50

manufacturer

Easy Up

options

UPS Shippable

20 Foot Telescopic Push-Up Antenna Mast EZ TM-20-U

20 Foot Telescopic Antenna Mast 3 Way Down Guy Wire Kit - $126.00

H203WAYGUY Telescopic Antenna Mast Down Guy Wire and Anchor Kit
is designed to Securely 3 way Guy at 2 levels your ROHN H20 , Easyup TM20,and Channel Master 1620, 1820 Telescopic Push Up Antenna Masts. Choose Guy wire gauge and Anchor size. Mast is not included...

20 Foot Telescopic Antenna Mast 4 Way Down Guy Wire Kit - $158.00

H204WAYGUY Telescopic Antenna Mast Down Guy Wire and Anchor Kit is designed to Securely 4-Way Guy at 2 levels your 20' telescoping mast. Works with the ROHN H20 and Channel Master 1620, 1820, Telescopic Masts

4 inch Heavy Duty Antenna Mast Wall Mount Bracket - $9.95

SKY 32812 Heavy Duty Antenna Mast 4 inch Wall Mount Bracket
is designed to provide supplemental Wall Mount Support for ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast like the CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S, 3S-5999 and 3S-5994 from 1 to 2.25 Inches in Diameter (Mast not included). Set of (2) comes with Installation Hardware. Guy Wire Support for Mast Sections 10 Feet and greater above this mount will still be required...

12 inch Telescopic TV Antenna Mast Wall Mount Bracket 3S-WM12W - $23.50

3S-WM12W Telescopic TV Antenna Mast 12" Wall Mount Bracket

Made in the USA!
is designed for Wall Mount Support of ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up TV Antenna Masts or ANY Mast from 1.25 to 3 inches in Diameter (Mast not included). Guy Wire Support for Mast Sections above this mount will still be required...

18 inch Telescopic TV Antenna Mast Wall Mount Bracket 3S-WM18W - $28.40

3S-WM18W Telescopic TV Antenna Mast 18" Wall Mount Bracket

Made in the USA!
is designed for Wall Mount Support of ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up TV Antenna Masts or ANY Mast from 1.25 to 3 inches in Diameter (Mast not included). Guy Wire Support for Mast Sections above this mount will still be required...

24 inch Deluxe Y Wall Mount Antenna Bracket EZ30-24 - $34.95

3S-WM-24 24" Stand-off, Deluxe "Y" Wall Mount with 3rd Leg

Made in the USA!
For Mounting of CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S and 3S-5994 HDTV Antenna Masts from 1 inch to 1.75 inches in Diameter and up to 10 feet in Height, Standoff from Wall by 24 inches (Mast Not Included)...

30 inch Telescopic TV Antenna Mast Wall Mount Bracket - $24.95

3S-WM-30W Telescopic TV Antenna Mast 30" Single Wall Mount Bracket

Made in the USA!
is designed for Wall Mount Support of ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up TV Antenna Masts or ANY Mast from 1.25 to 3 inches in Diameter (Mast not included). Guy Wire Support for Mast Sections above this mount will still be required...

EZ19B Roof Base Mount for Telescopic Antenna Mast - $18.08

EasyUp 19-B Universal Telescopic Push Up Antenna Mast Roof Base Mount
Made in the USA!
is completely assembled for Flat or Peaked Roof Mounting ROHN H40, H50 , 9H50 EASYUP TM40 , TM40U , TM50 and Channel Master 1640, 1650, 1840, 1850 Telescopic Push Up Antenna Masts up to 2-3/8 inches in DIA...

EZ32A Telescopic Antenna Mast Heavy Duty Base Plate - $21.95

3 Star Inc. EZ32A Heavy Duty Telescopic Mast Ground Mount
Made in the USA!
is designed to support and facilitate grounding for ROHN H20, H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic (Push-up) Antenna Masts. Outer dimensions are 9 x 9 inches...

EZ32C Telescopic Antenna Mast Heavy Duty Base Plate - $24.95

3 Star Inc. EZ32C Heavy Duty Telescopic Mast Ground Mount
Made in the USA!
is designed to support and facilitate grounding for ROHN H20, H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic (Push-up) Antenna Masts. Outer dimensions are 9 x 9 inches with 6 inch tall collar...

ROHN Universal Telescopic Push Up Antenna Mast Roof Mount R-ETMB - $70.38

ROHN ETMB Universal Telescopic Push Up Antenna Mast Roof Mount
Made in the USA!
is designed to facilitate Roof Mounting ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Masts...

Complete Grounding Kit for Telescopic Masts - $29.95

3 Star's Telescopic Mast Grounding Kit
Universal grounding kit for telescopic masts include ground rod, ground wire and grounding block...

Rate this product.

Product isn't rated yet. Write a review.

Professional Grade Telescopic Push Up Poles for Digital TV, Wifi Antenna & Weather Sensors.

We stock the highest quality telescopic masts made from 18 and 16 AWG galvanized steel right here in the USA. These push up poles are suitable for tons of applications where a fast an simple extension is needed. They have been used for everything from digital TV antenna applications to wireless communications to weather stations and even IoT Sensors. The masts can be used retracted or fully extended and anywhere in between. They can be supported and mounted against a structure, mounted on a roof or even guyed in the middle of a field. Our reliable and durable telescopic poles come in heights of 20, 30, 35, 40 and 50 FT and all have a engineered thumbscrew/collar system for setting height.

Note:

These telescoping masts are not recommended for commercial, CB or beam antenna installations.

Antenna load (top load ) should not exceed an effective projected area ( EPA ) of 2 square feet ( see your antenna specifications

Looking for just a simple mast pipe? View our similar antenna mast poles for lengths ranging from 5 FT to 10 FT and our variaty of telescopic mast mounts to complete your next installation.