ROHN FRM225 Non-Penetrating Roof Mount 2.25 x 60 inch Mast
Made in the USA!
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3’ square with a 16” tray to fit concrete blocks, typically used as ballast for placement of various TV, Radio, Microwave, WiFi and Wireless Internet Antennas. The base mount is 16 gauge Pre-Galvanized and the mast tube is thick-walled galvanized steel for corrosion protection and goes together quickly. Antenna and wind loads vs ballast weight are found in the spec sheet below.
FRM-MAT Satellite Dish Non-penetrating Roof Mount Rubber Protective Mat
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/32 thick Pad measures roughly 36 wide by 42 inches long, trims neatly, place underneath Frame of Non-Penetrating mount, on top of Roof surface...
1. ROHN FRM225 Non Penetrating Roof Mount R-FRM225 - $156.00 | 2. RG11 QUAD Shield Coaxial Cable for Aerial 50 Feet - $35.00 |
3. ROHN 45GSR Complete 60 Foot 130 MPH Guyed Tower R-45GSR130R060 - $8,259.00 | 4. ROHN 45GSR Complete 140 Foot 130 MPH Guyed Tower R-45GSR130R140 - $17,908.00 |