ROHN BRM635M Non-Penetrating Roof Mount 3.50 inch x 4 foot Mast
Mast Dimensions - 3” STD. Pipe (3-1/2 O.D.) x 45-3/4”
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 10' square with a 16” tray to fit concrete blocks, typically used as ballast. The base mount and mast pipe are Hot dip galvanized for corrosion protection and go together quickly.
ROHN BRM6MAT Protective Rubber Mat for BRM6 Roof Mount
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 1/8 thick Mat is for placement underneath the Frame of a BRM6 Non-Penetrating mount, on top of Roof surface...
ROHN BRM6PAD Protective Barrier Pad for BRM6/ 25GBRM Roof Mount
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad is for placement underneath the Frame of a BRM6 Non-Penetrating mount, on top of Roof surface...