SSV 20' Tapered Section 1'-6" Lower and 1'-2" Lower Spread . Solid Round Legs & Solid Round 3/8" O.D. Bracing ,Hot Dipped Galvanizing for Corrosion protection .
12 x 3/8" x 1-1/2" HCS Grade 5 Bots included with Tower .
GENERAL NOTES:
1. Leg Part Numbers is stamped at bottom of each leg and must be located at the bottom of each section for proper assembly.
2. Flange bolts are for flange plates at bottom of the section.
3. Drawings is N.T.S. and is for assembly purposes only.
4. Nominal metric equivalents are given for reference only and shall not be substitued for the described sizes unless otherwise approved by Rohn Products.
This Item Ships LTL Freight ONLY...
Click Here for: What You Want to Know about Shipping!
ROHN Tower are designed based on assumptions made regarding Windspeed, EPA (Antenna Load), Height, Standard Soil Conditions, Surrounding Environment and Duty. The Pre-packaged Kits contain the parts called for based on a SSV Catalog Design. The SSV Catalog Design does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project. It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, and/or find the Tower Quote Data Sheet Form by clicking the Quick link that appears on the Footer of this Page Below. *Per Rev G requirements, any structure greater than 10 ft requires a climber safety device.
The SSV self-supporting tower sections legs are tubular with angle braces on bottom and solid legs with steel cross bracing with lighter upper sections using a Zig-Zag brace pattern. The SSV tower sections can be combined with “K” braced SSMW self-supporting tower sections for added height and strength when needed.
Time tested strength and design, the ROHN SSV series of self-supporting towers provide an excellent strength to cost ratio proven by years of use. In production for nearly years in our tower design and tower manufacturing facilities, the SSV tower has evolved into a highly efficient and wide ranging system of custom towers produced from pre-engineered sections. The ROHN SSV tower is the quality standard in the industry for small to mid range self-supporting towers.
The ROHN SSV tower has been in service for over 50 years. The design utilizes standard parts arranged to create a unique structure. The legs are tubular with angle braces at the bottom and solid legs and braces in the top sections. This tower is used in a variety of applications, from PCS structures and broadband to security, sports lighting and more. The SSV has proven to be one of the industry’s most efficient and preferred structures. All ROHN SSV towers are hot-dip galvanized, inside and out for corrosion protection.
General Notes: 1. Standard tower designs are in accordance with approved national standard ANSI/TIA-222-G, Structure Class II, Topographic Catergory 1, 3/4” design ice thickness, seismic coeffilient SS < 1.0. 2. Tower designs assume allowable projected areas are symmetrically placed on the tower. 3. Designs assume one 7/8 line to top and two 7/8 lines to 30 feet below top, one line on each face. 4. All towers are provided with step bolts and a tapered top. 5. Grounding kit must be ordered seperately. 6. Assembly drawings and standard foundation details are supplied with the tower. 7. Custom designs for site-specific applications are available upon request |
![]() |
![]() |
|
![]() |
![]() |
![]() |