3S-10-23Heavy Duty Pipe to Pipe Mount 1.50" to 3.50" OD
Heavy duty antenna pipe to Pipe mount ideal for use on vertical or tapered tower legs . Attaches two pieces of similar sized pipes 1.50" OD to 3.50" OD. Clamp Half ,1/2" Thickness . Hot Dipped Galvanized for corrosion protection .Ideal for use on Towers and Ice Bridge posts
Includes:
4 - HDG 5-7/8" wide 1/2" Thick Clamps
Pipe Range 1.5" - 3.50"
2 - 10" x 1/2" HDG threaded Rods
8 - HDG Hex Nuts
The Pole to Pole & Crossover mounts are designed to support most WiFi , PCS, Cellular, and TV antennas. The Pole to Pole Mounts allows you to vary the mounting pipe length and diameter,
All of our mounts are weather protected using either a HDG (Hot Dipped Galvanized) or a Pre-Galvanization finishing process for corrosion protection.
The pole to pole mounts allow you to connect one pole or mast to an adjacent pole or mast of the same or of varying diameter.
You can increase the amount of strength and holding power by utilizing multiple mounts space out over the length of the mounting pipe. There are many reasons you might need to use these mounts and they mostly involve the need to attach a pole to another pole to either extend the original or simply as an attachment point.
All of our pole to pole mounts can easily be shipped UPS.
3S-MD-CL Heavy Duty Medium Mast Clamp and Round U Bolt
The Pole to Pole Mounts is designed to support most WiFi , PCS, Cellular, and TV antennas. The Pole to Pole Mounts allows you to vary the mounting pipe length and diameter, It is Pre- galvanized for corrosion protection
3S-HD-PTP-4S Pole Mount Clamp Jaws
Heavy duty pole mast mount Clamp Jaws. Can clamp tubing 1.66" OD to 3" OD. Zinc plated. No Hardware or complete clamping solution included...