VMP BR-4XD 4" Stand-off "W" Galvanized Steel Wall Mount
is designed to provide supplemental Wall Mount Support for ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast like the CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S, 3S-5999 and 3S-5994 from 1 to 2.25 Inches in Diameter (Mast not included). Set of (2) comes with Installation Hardware. Guy Wire Support for Mast Sections 10 Feet and greater above this mount will still be required...

Multi-Configurable Small Flat Panel Articulating Mount

A versatile ceiling mount that extends 17

A versatile ceiling mount that extends 17

Small Flat Panel Tilt Mount

Small Flat Panel Universal Desk Mount with adjustable arm in black.

The LCD-PV kit comes with a LCD-2537CB, plumbing pipe adaptors for extended drops and a camera mounting bracket. With a heavy load capacity and adjustable rotation and tilt; the LCD-PV is a perfect solution for public view applications.

VMP LCD-1 Multi-Configurable Small Flat Panel Wall Mount
Holds most 10 to 23 inch LCD Monitors, rotation at wall, elbow and Monitor, minus 5 to plus 20 degree tilt. Available in Black or Silver Powder Coat Finish...

Multi-Configurable Medium Flat Panel Articulating Mount

This mount is a versatile ceiling display mount that can handle most flat panels 25" to 37". The LCD-2537C allows perfect flat panel placement using adjustable mast extension, monitor rotation and tilt

The LCD-MID-CB is a medium flat panel ceiling mount that can accommodate most 27" to 42" flat panels. This versatile mount can handle a wide range of ceiling applications with its adjustable tilt, extension, rotation and rails to ensure perfect flat panel placement.

Medium Low Profile Flat Panel Articulating Mount

Discontinued

Medium Flat Panel Flush Mount, Holds 27" - 42" FLAT PANELS

Multi-JustTM Medium Flat Panel Tilt Mount

The LCD-MID-FTB is a medium flat panel tilt mount. It holds most flat panels 27" to 42", has adjustable tilt while keeping it close to the wall. Rails adjust left to right and lock in place for perfect flat panel placement.

VMP FP-MF Mid-Size Flat Panel Flush Wall Mount
Holds most 27 to 42 inch Flat Panels with a Distance from the wall to the back of the Monitor of 1 inch. Available in Black or Silver Powder Coat Finish...

The LCD-MID-CM2B adapter allows the LCD-MID-CB to accommodate two 27" to 42" flat panel displays back-to-back with a combined weight of up to 200 lbs.

The LCD-MID-FTB is a medium flat panel tilt mount. It holds most flat panels 27" to 42", has adjustable tilt while keeping it close to the wall. Rails adjust left to right and lock in place for perfect flat panel placement.

Extra Medium Low Profile Flat Panel Articulating Mount

Extra Medium Flat Panel Tilt Mount

The PDS-LCB is a large flat panel ceiling mount that can accommodate most 37" to 90" flat panels. This versatile mount can handle a wide range of ceiling applications with it's adjustable tilt, extension, rotation and rails to ensure perfect flat panel placement.

The PDS-LCHB is the mounting head of the VMP ceiling mount the PDS-LCB. Used with preexisting 1.5" NPT pipe to mount most 37" to 80" flat panels. This versatile mount can handle a wide range of ceiling mount applications with its adjustable tilt, extension, rotation and rails to ensure perfect flat panel placement.

Large Flat Panel Flush Mount

Large Flat Panel Articulating Mount

Large Flat Panel Flush Mount

The PDS-LFTB is a tilting mount that will handle most flat panels 42" to 90". Adjustable rails and tilt make flat panel placement easy to set. The PDS-LFTB can handle up to 180 lbs and mounts only 2.6" off the wall.

VMP FP-LDSB Large Flat Panel Digital Signage Mount
Holds most 32 to 63 inch Flat Panels in portrait or landscape, with up to a 15 degree tilt. Available in Black Powder Coat Finish...

VMP FP-LF Large Flat Panel Flush Mount
The FP-LF is a fixed flat panel wall mount that can handle most displays 42" to 70". The FP-LF comes in silver or black (FP-LFB), has a 180 lbs load capacity and has only a 1.4" mounting depth. The rails of the FP-LF can slide left to right for perfect flat panel placement and easy installation...

VMP FP-LFVB Large Flat Panel Flush Wall Mount
Holds most 42 to 63 inch Flat Panels with a Distance from the wall to the back of the Monitor of 1.0 inch. Available in Black or Silver Powder Coat Finish...

VMP FP-SFB Small Flat Panel Flush Wall Mount
Holds most 10 to 30 inch LCD Monitors with a Distance from the wall to the back of the Monitor of 1/2 inch. Available in Black or Silver Powder Coat Finish...

VMP FP-SFBT Small Flat Panel Flush Wall Mount with Tilt
Wall Mount for holding most 10 to 23 inch LCD Monitors with Tilt Angle of minus 5 to plus 15 degrees. Available in Black or Silver Powder Coat Finish...

VMP FP-XMFTB Extra Medium Flat Panel Flush Mount with Tilt
is a mid-size flat panel mount with tilt that will handle most flat panels 32" to 52".  Adjustable rails and tilt make flat panel placement easy to set.  The FP-XMFT can handle up to 120 lbs and mounts less then 2.3" off the wall. The open back design allows for easy management behind the panel.

VMP LCD-1C Small Flat Panel Ceiling Mount
Holds most 10 to 23 inch LCD Monitors, telescoping 17 to 27 inches down. Available in Black, White or Silver Powder Coat Finish...

VMP LCD-2 Universal LCD Monitor Table & Desk Mount
Desk or Counter-Top Swivel Mount Holds Most 10 to 23 inch LCD Monitors up to 25 lbs...

VMP LCD-2537 Multi-Configurable Mid-Size Flat Panel Wall Mount
Holds most 25 to 32 inch LCD Monitors, rotation at wall, elbow and Monitor, minus 5 to plus 30 degree tilt. Available in Black or Silver Powder Coat Finish...

VMP LCD-2537C Mid-Size Flat Panel Ceiling Mount
Ceiling Mount capable of holding most 25 to 37 inch LCD Monitors telescoping 18 to 30 inches down. Available in Black or Silver Powder Coat Finish...

VMP LCD-CM2B Dual Small Flat Panel Ceiling Mount AdaptorThis adapter allows the LCD-1CB to accommodate two 10"to 23" flat panels back to back.

VMP LCD-DM2 Dual Small Flat Panel Desk Mount AdaptorThis adapter allows for two LCD-1 mounts to be attached onto a desktop via clamp-on or bolt through.  Accommodates most flat panels 10" to 23" with a combined load capacity of 50 lbs.

The LCD-MID-CB is a medium flat panel ceiling mount that can accommodate most 27" to 42" flat panels. This versatile mount can handle a wide range of ceiling applications with its adjustable tilt, extension, rotation and rails to ensure perfect flat panel placement

The LCD-MID-CHB is the mounting head of the VMP ceiling mount the LCD-MID-CB. Used with preexisting 1.5" NPT pipe to mount most 27" to 42" flat panels. This versatile mount can handle a wide range of ceiling mount applications with its adjustable tilt, extension, rotation and rails to ensure perfect flat panel placement. Used with preexisting 1.5" NPT pipe to mount most 27" to 42" flat panels.  This versatile mount can handle a wide range of ceiling mount applications with its adjustable tilt, extension, rotation and rails to ensure perfect flat panel placement.

VMP LCD-MID-F Universal Mid-Size Flat Panel Flush Mount
Holds most 27 to 42 inch Flat Panels with a Distance from the wall to the back of the Monitor of 1 inch. Available in Black or Silver Powder Coat Finish...

VMP PDS-LC Large Flat Panel Ceiling Mount with Tilt
Ceiling Mount capable of holding most 37 to 63 inch Flat Panel Displays telescoping 23 to 35 inches down. Available in Black or Silver Powder Coat Finish...

VMP PDS-LCM2B Large Flat Panel Ceiling Mount Adaptor
This adapter allows the PDS-LCB to accommodate two 37" to 70" flat panel displays back-to-back with a combined weight of up to 360 lbs.

VMP PDS-LFT Large Flat Panel Flush Mount With Tilt
Wall Mount capable of holding most 42 to 63 inch Flat Panel Displays with Tilt Angle of minus 5 to plus 15 degrees. Available in Black or Silver Powder Coat Finish...

VMP PM-1 Large Clamping Projector Mount
The PM-1 offers a unique 8-point clamping mechanism with a 360-degree system of support allowing safe installation of expensive projectors.

1.5

Black (AP-1B) or Silver (AP-1)

Can be used as 1

VMP AP-1 400mm x 200mm VESA Adaptor Plate
Designed Specifically to work with the LCD-2537 and LCD-2537C...

VMP AP-2B 300mm x 300mm VESA Adaptor Plate
Designed Specifically to work with the LCD-2537B and LCD-2537CB...

VMP AR-1B Portrait Mounting Rails
mounting rails designed to extend the length of the mounting rails of various mounts for portrait mounting or mounting larger vertical hole patterns.

VMP DS-CH Digital Signage Computer Holder
The DS-CH uses tamper resistant hardware to keep a digital signage computer secure.  It easily attaches to any wall or ceiling mount in either portrait or landscape positions.

VMP DS-BP FP-LDSB Wall Plate Extension
The DS-BP enables the FP-LDSB digital signage mount to be extended to add additional flat panels for video walls. 

*CH-002B shown stacked w/ the CH-001B (each sold separately)

*CH-002B shown stacked w/ the CH-001B (each sold separately)

IWB-1

IWB-1B

VMP LCD-PA Pole Adaptor
Pole adaptor used with the LCD-1 and LCD-2537 to enable these mounts to be attached to a round or square pole.

VMP LCD-WM2 Dual LCD Monitor Wall Mount
Allows attachment of (2) LCD-1 mounts (sold separately)...

VMP SCM-1 Suspended Ceiling Mount
For use with 2 x 2 or 2 x 4 foot ceiling tiles and Standard NPT or VMP Ceiling Masts...