Printer Friendly Tell a Friend

Structured Wiring 10 Output Audio Speaker System Module

Highlights
Power Handling: 200 watts RMS per channel maximum
Input wire: Up to 10ga
Output wire: Up to 14ga
Removable wiring connectors allow pre-wiring of the system.
Fits most structured wiring panels
Dimensions: 6-1/4in x 2-7/8in x 1-3/8in
Price: $52.49
Manufacturer Code: CHO1005
Stock Level: 0
Availability: Call to Order
Shipping: Can ship anywhere
Skywalker SKYCHO1005 Structured Wiring 10 Output Speaker System Distribution Module
Will distribute audio signal to 10 rooms. You can connect up to 10 pairs of speakers to any standard Entertainment Center or Public Address System. No speaker switching device is needed. It features removable wiring connectors, which allow you to pre-wire the system. NOTE: Must be used with IMPEDANCE MATCHING volume controls. Use of resistive or other volume controls may damage your amplifier.


Specification Sheet
Spec Sheet
Product isn't rated yet. Write a review.

Though Structured Cable Products and Home Network Wiring is Bundled Together for Economy in Space and Ease of Installation, the Component Cables and Wires should still be treated as Individual with the Systems to which they belong as compared to the Whole. No One System should be Sacrificed to serve the Needs of Another. When Preparing Terminations, Leave Plenty of Tail before Prep, and Plenty of Spare to Coil after. This will Serve Future Expansion Well. Most Manufacturers know the limitations of the Individual Wires and Cables their are Bundling, Make Sure you do too. It is Especially Important to Approach Installation as the Most Fragile of Companents as the Major Consideration. Do not Force the Issue, If It doesn't fit, Be patient enough to Figure a Work-Around. A properly prepared Communications PVC Conduit route involves sweeps, not 90 Degree bends, and as few as possible. The size of the conduit should be 4 times that to be occupied. Install with MuleTape already inside for ease of pull-through. Do not under any circumstances colocate communications circuits with power. Even in Conduit, power circuits and routings should be crossed at 90 angles of intersect as to avoid field induction. If your routing has to be parallel, consider 2 feet to be minimum distance if either is shielded, 4 to 6 feet if not. Comm circuits should avoid flourescent lighting at all costs... The fields generated from the ballast transformer and even the bulb will wreak havoc on todays micro-circuits.

There are Panel Box Systems made for central inter-connection of Video, Telco, Internet and Intercom. Regardless of manufacture, they are pretty much standardized in the block-out of space inside, and the installation of the Modular blocks of Termination and patching. Again, AC power for the systems should remain outside the panel, with either the transformers plugged into the outlet and DC running through the bulhead inside the Panel, or the standard AC plug running through a bulk-head to the outlet outside the Panel.

Products   Recently Viewed
Your Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!