3 Star Inc 6003 Non-Penetrating Satellite Dish Roof Mount with Protective Rubber Mat
Ideal for 18 or 24 inch Satellite Antenna mounting with a hole footprint of 3.5-3.75" X 6.0-6.5", is constructed of pre-galvanized steel, uses 6 standard concrete blocks to anchor, 25.5 x 37.5" frame, includes Protective Mat! (Dish and J Pipe Mount not included). This is the perfect solution for flat roofs or temporary installations! Single base frame covers approximately six square feet. The SKY6003 mount is held in place using concrete blocks or bags of sand. No hole drilling or bolting to the roof surface is necessary. No penetration of roof surface. For use on flat roofs or patios only. Base frame for 46 and 60cm antennas Single base frame covers approximately six square feet. Place up to 6 concrete blocks to stablize mount. Securely mounts 18in or 24in dish to a flat surface without the need for surface penetration.
The pad protects the surface underneath a Non-Penetrating roof mount. Perfect for temporary installations! Prevents slipping. Guards against leaks! Works great with our 6003 Non-Penetrating roof mount. Made of Natural Rubber, 35 x 60 inches by 1/8 inch thick.
Note: Height and Antenna Loading capability are dependant upon ballast weight. You need to Consult an Engineer to determine the Load Bearing Capability of the roof that you are entertaining such an Installation . It is Important to choose a Mount and Mounting Location with a Picture of the Finished Installation in Mind. Be Sure to First select a location that lends itself to applying a Load without Compromising the Integrity of the Material you affix to. Most Decorative Finishes most often do not have the Strength to Hold a Weight or Pressure without fail. Further, Think about what's underneath the exterior. Is it stronger, or will it yield to Pressure over time also? Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied in cantilever also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification.