Your Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!
Printer Friendly Tell a Friend

4 inch Standoff Antenna Mast Wall Mount Bracket RON-104

Highlights
True 4 inch Stand-Off
"W" Type Configuration
11 guage Steel
Anti-Turn Screw 
Up to 1-1/2 inch Dia
Hardware Included
Price: $9.95
Manufacturer Code: RON-104
Stock Level: 0
Availability: Call to Order
Shipping: Can ship anywhere
RONARD RON-104 "W" Wall Mount Bracket 4" Standoff for Antenna Mast Pole
For Mounting Mast from 1 to 1.50 Inches in Diameter and up to 10 Feet in Height. 2 inch Hardware included. Professional Grade, Sturdy.(Mast not Included)


Note: This Design of Wall Mount Bracket for Antenna Mast installation is unique as it provides an additional Set Screw applied to the Mast inserted to prevent twisting and turning in the wind. It can accomodate 1.00 to 1.50 inch diameter Masting for antennas (which is normal) safely with the Hardware that is supplied. If you are Installing larger masts such Telescopic Antenna Masts, use "W" Brackets that feature 2 and 1/2 inches between Clamp Bolts instead and run the Mast length all the way to the Ground, resting the weight on a Mast Ground Plate and affix an Earth Ground there with a 5/8 inch diameter, 8 foot long Ground Rod as a minimum.
Product isn't rated yet. Write a review.

Wall Mounts

Choosing a Wall Mount Bracket for Satellite TV Antenna Mast

It is important to choose a wall mount and wall mounting location with a picture of the finished antenna installation in mind.

Most modern exterior decorative wall finishes most often do not have the strength to hold the weight and pressure of a large TV antenna. Be sure to first select a location that lends itself to applying a vertical, cantilevered, twisting load without compromising the integrity of the wall material you affix to.

Beams and studs within the wall are an absolute must to locate when the wall composition is anything other than solid wood or concrete. Always attach to these strength members. Furthermore, think about what's underneath the wall exterior. Is it stronger, will it yield to pressure over time as well?

Sandwich additional material (wood or steel) to the backside or both sides of the wall at the points where the mount attaches, as to distribute the load on relatively weak wall materials and to dampen vibration from wind. Weather proof the installation to maintain the integrity of your home. Next consider the location over a lifetime of adjustments. Does it lend itself to modifications in height or direction?

Larger antennas increase the surface area presented to air movement, hence, wind-load does increase. As the length of the mast increases from its last attached point on the structure, the torque applied also increases with weight and wind-load, requiring a more substantive attachment and load-bearing material. Keep the distance minimal from the antenna to the TVs and equipment you feed, as to minimize loss and the need for amplification. Further, the NEC (national electrical code partly defines a good ground connection as being as short as possible. You must affix a connection to a good earth ground prior to premise entry or bond to an existing one.

Products   Recently Viewed