Home > Products > ROHN Towers & Masts > ROHN Down Guy & Anchor > ROHN Tower Guy & Anchor
RSS

Sort by:
Default

ROHN Tower Guy & Anchor

5/8TBE&E Turnbuckle for ROHN Tower 5/8 x 12 inch Eye to Eye
5/8 x 12 inch Eye to Eye Turnbuckle 5/8TBE&E
Price: $18.95
Manufacturer Code: 5/8X12TBE&E
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart
ROHN 5/8TBE&E 5/8" x 12" Eye to Eye Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 3500 lbs., Ultimate Strength: 17500 lbs.
Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations (1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Pre-formed deadend and 3/8THH, 5/16" Strand via Pre-formed deadend and 7/16THH or 5/16" Bare Strand, 3/8" Strand via Pre-formed deadend and 1/2THH or 3/8" Bare Strand via Cable Clamps and 7/16THH) to Equalizer Plate Anchors (Sandwich Plated like GAC305/EP25345 or GAC303/EP25343)...

5/8TBE&J Turnbuckle for ROHN Tower 5/8 x 12 inch Eye to Jaw
5/8 x 12 inch Eye to Jaw Turnbuckle 5/8TBE&J
Price: $19.95
Manufacturer Code: 5/8X12TBE&J
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart
ROHN 5/8TBE&J 5/8" x 12" Eye to Jaw Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 3500 lbs., Ultimate Strength: 17500 lbs.
Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations (1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Pre-formed deadend and 3/8THH, 5/16" Strand via Pre-formed deadend and 7/16THH or 5/16" Bare Strand via Cable Clamps and 3/8THH, 3/8" Strand via Pre-formed deadend and 1/2THH or 3/8" Bare Strand via Cable Clamps and 7/16THH) to Closed Eye GAR30 or Integral Equalizer Plate Anchors (like GAC3455TOP, GAC5655TOP or GAC5755TOP)...

5/8TBE&J Turnbuckle 5/8 x 12 inch Round Eye to Jaw
5/8 inch Eye to Jaw Turnbuckle 5/8TBE&J
Price: $38.95
Manufacturer Code: 5/8 TBE&J-12
Average Rating: 5
Availability: Usually ships in 24 Hrs
Qty:
Add to Cart View Cart
ROHN 5/8TBE&J 5/8" x 12" Round Eye to Jaw Turnbuckle
Round Eye Turnbuckle, Forged, Hot Dip Galvanized, Open Body, Eye to Jaw, Working Load Limit: 3500 lbs., Ultimate Strength: 17500 lbs...

Tower Guy Wire Tension Guide

The recommended initial tension in guy wires is 10% of their ultimate tensile strength. There are two different grades of steel used for good guy line (clothes line does not count), HS (high strength) and EHS (extra high strength). The Rohn manual gives the following info on 3/16 and 1/4 in cable.

      

Online Orders Only

New Store to Open 2023
Three Star Inc.
5750 Stuart Ave.
Jacksonville, FL 32254

Your Orders are Currently being Processed and Shipped out of Richmond, VA.

My Cart
Authorize.Net Merchant - Click to Verify
Credit Cards Taken
Your shopping cart is empty!
Size:
5/8" Inch - remove filter