Printer View Tell a Friend

ROHN H40 Telescopic Antenna Push Up TV & Wireless Internet Antenna Mast

Highlights

 

 

Use As Guyed or Bracketed
Guy Rings Rotate
Five Guy Holes/ Ring
Masts have hardware
35 Feet    Total length

 

 

Bulk Quantities Available Here!

Price: $163.00
Manufacturer Code: H40
Qty:
Availability: Usually ships in 24 Hrs
Shipping: Can ship only within USA

ROHN H40 Foot Telescoping TV Antenna Mast


Made in the USA!Made in the USA!
 

Used for Off-Air TV Antenna, Amateur (Ham) Radio, Wireless Internet Antenna, MMDS and Cell Phone Signal Booster Installations (not included). All Telescoping push-up Masts are galvanized and come with hardware designed to support light duty antennas in various applications. The unique Rohn design features interior tube flanging combined with a double crimped exterior tube to produce a stronger and more stable joint than most common mast. Each section extends deeper into the lower tubes than most designs, adding to the masts stability. Height describes the overall pipe length. Due to overlapping, extended masts will be shorter. This Mast extends to about 35 Feet in actual height that ships to Commercial and Residential addresses alike.

Estimated Usable Extended Height is around 35 feet.


Mast Section Dimensions are:


(1) 10'0" length x 1.25" O.D. (16 AWG)
(2) 9'10" length x 1.50" O.D. (18 AWG)
(3) 9'04" length x 1.75" O.D. (18 AWG)
(4) 8'10" length x 2.00" O.D. (18 AWG)
Compare to Channel Master 1640, 1650, 1840 Telescopic Masts!

 

All  Masts are pre-galvanized for corrosion protection and comes assembled with hardware .

 


This Item Ships LTL Freight ONLY...

Note:

Installation Guidelines:

  1. Installation or dismantling of telescoping masts require professional contractors experienced with guyed masts.
  2. All installations must be bracketed or guyed.
  3. The pictured guy wire kit layouts are for a typical installation. Individual installation requirements may vary.
  4. Antenna load (top load) should not exceed an effective projected area (EPA) of 2 square feet (see your antenna specifications).
Specification Sheet
Spec Sheet
Install Sheet
height
40
manufacturer
Rohn
options
Ships Freight
ROHN H40 Telescopic Antenna Mast 40 Foot Telescopic Antenna Mast 3 Way Down Guy Wire Kit - $240.00

H403WAYGUY Telescopic Antenna Mast Down Guy Wire and Anchor Kit
is designed to Securely 3 way Guy at 4 levels your ROHN H40 , EasyUp EZ TM40 and Channel Master 1640, 1840 Telescopic Push Up Antenna Masts. Choose Guy wire gauge and Anchor size. Mast is not included...

Read More
ROHN H40 Telescopic Antenna Mast 40 Foot Telescopic Antenna Mast 4 Way Down Guy Wire Kit - $309.00

H404WAYGUY Telescopic Antenna Mast Down Guy Wire and Anchor Kit
is designed to Securely 4 way Guy at 4 levels your ROHN H40 and Channel Master 1640, 1840 Telescopic Push Up Antenna Masts. Choose Guy wire gauge and Anchor size. Mast is not included...

Read More
ROHN H40 Telescopic Antenna Mast EZ32 Telescopic Antenna Mast Base Plate - $14.95

3 Star Inc. EZ32 Telescopic Mast Base Plate Mount
Made in the USA!Made in the USA!
is designed to support and facilitate grounding for ROHN H20, H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic (Push-up) Masts. Outer dimensions are 9 x 9 inches...

Read More
ROHN H40 Telescopic Antenna Mast EZ19B Roof Base Mount for Telescopic Antenna Mast - $18.08

EasyUp 19-B Universal Telescopic Push Up Antenna Mast Roof Base Mount
Made in the USA!Made in the USA!
is completely assembled for Flat or Peaked Roof Mounting ROHN  H40, H50 , 9H50 EASYUP TM40 , TM40U , TM50 and Channel Master  1640, 1650,  1840, 1850 Telescopic Push Up Antenna Masts up to 2-3/8 inches in DIA...

Read More
ROHN H40 Telescopic Antenna Mast 4 inch Heavy Duty Antenna Mast Wall Mount Bracket - $9.95

SKY 32812 Heavy Duty Antenna Mast 4 inch Wall Mount Bracket
is designed to provide supplemental Wall Mount Support for ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast like the CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S, 3S-5999 and 3S-5994 from 1 to 2.25 Inches in Diameter (Mast not included). Set of (2) comes with Installation Hardware. Guy Wire Support for Mast Sections 10 Feet and greater above this mount will still be required...

Read More
ROHN H40 Telescopic Antenna Mast 12 inch Deluxe Y Wall Mount Antenna Bracket 3S-WM12 - $19.95

3S-WM12 12" Stand-off, Deluxe "Y" Wall Mount with 3rd Leg


Made in the USA!Made in the USA!
For Mounting of CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S and 3S-5994 HDTV Antenna Masts from 1 inch to 1.75 inches in Diameter and up to 10 feet in Height, Standoff from Wall by 12 inches (Mast Not Included)...

Read More
ROHN H40 Telescopic Antenna Mast 18 inch Telescopic TV Antenna Mast Wall Mount Bracket 3S-WM18W - $28.40

3S-WM18W Telescopic TV Antenna Mast 18" Wall Mount Bracket


Made in the USA!Made in the USA!
is designed for Wall Mount Support of ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up TV Antenna Masts or ANY Mast from 1.25 to 3 inches in Diameter (Mast not included). Guy Wire Support for Mast Sections above this mount will still be required...

Read More
ROHN H40 Telescopic Antenna Mast 24 inch Telescopic TV Antenna Mast Wall Mount Bracket 3S-WM24W - $34.75

3S-WM24W Telescopic TV Antenna Mast 24" Wall Mount Bracket


Made in the USA!Made in the USA!
is designed for Wall Mount Support of ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up TV Antenna Masts or ANY Mast from 1.25 to 3 inches in Diameter (Mast not included). Guy Wire Support for Mast Sections above this mount will still be required...

Read More
ROHN H40 Telescopic Antenna Mast 30 inch Telescopic TV Antenna Mast Wall Mount Bracket - $24.95

3S-WM-30W Telescopic TV Antenna Mast 30" Single Wall Mount Bracket


Made in the USA!Made in the USA!
is designed for Wall Mount Support of ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up TV Antenna Masts or ANY Mast from 1.25 to 3 inches in Diameter (Mast not included). Guy Wire Support for Mast Sections above this mount will still be required...

Read More
ROHN H40 Telescopic Antenna Mast ROHN 12 inch Double Mount Antenna Mast Bracket WM12D - $84.00

ROHN WM12D Antenna Mast 12 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...

Read More
ROHN H40 Telescopic Antenna Mast ROHN 18 inch Double Mount Antenna Mast Bracket WM18D - $86.00

ROHN WM18D Antenna Mast 18 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...

Read More
ROHN H40 Telescopic Antenna Mast ROHN 24 inch Double Mount Antenna Mast Bracket WM24D - $88.00

 

ROHN WM24D Antenna Mast 24 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...

 

Read More
ROHN H40 Telescopic Antenna Mast ROHN 4 inch Heavy Duty Wall Mount Bracket WM4 - $39.00

ROHN WM4 Telescopic Antenna Mast 4 inch "W" HD Wall Mount Bracket
Made in the USA!Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (2) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...

Read More
ROHN H40 Telescopic Antenna Mast Complete Grounding Kit for Telescopic Masts - $29.95

3 Star's Telescopic Mast Grounding Kit
Universal grounding kit for telescopic masts include ground rod, ground wire and grounding block...

Read More
Average Customer Rating: 5 based on 1 reviews. Write a review.

Positive Customer Review
AA0HP (Guest)
Equivalent to Channel Master 1640
light duty

Remember those older AM/FM Portable Radios with the antenna that you extended by pulling it out? Or the Radio Antennas on older cars that would pop- out, extend and retract when you turned on the radio? This Mast isn't an Antenna, but it extends and retracts by hand in similar fashion. Available in 20', 30', 40' and 50' heights. All ROHN telescoping masts are pre-galvanized and come assembled with hardware. Erection is made by simply connecting guys and brackets to the attached unique heavy duty rolled edge guy rings and clamps, extend each section one at a time (starting with the innermost section), insert the locking cotter pins, rotating the tubes to a locked position, and tightening the clamps. Repeat the process on each successive section until fully erect.

The unique ROHN Products design features interior tube flanging combined with a double crimped exterior tube to produce a stronger and more stable joint than most common masts. This design exclusive also prevents the sections from accidentally pulling apart and allows disassembly by pulling each section out through the lower end.
Each section extends deeper in to the lower tubes than most other designs, adding still further to the stability of the structure.

H Series
This heavy duty series uses 1-1/4" 16 gauge galvanized tubing for top section. All other sections are 18 gauge.

Assembly
1. Secure base and anchors (sold separately).
2. Attach lowered mast to base.
3. Secure guy lines to the lower Guy Ring and attach to anchors. Align the mast vertically by tightening the Guy Lines.
4. Secure upper Guy Ring using the appropriate Mast Clamp to desired location on the upper Tube (see note 8 on page 10).
5. Secure appropriate length guy lines to the upper Guy Ring and let them hang.
6. Raise the upper Tube and inset the cotter pin. Make sure that the cotter pin is inside the notch in the inside tube.
7. Secure the cotter pin and tighten the mast clamp.
8. Secure appropriate length guy lines to the next highest Guy Ring, and let them hang.
9. Raise the next smallest Tube and insert the cotter pin. Make sure that the cotter pin is inside the notch in the inside tube.
10. Secure the cotter pin and tighten the mast clamp.
11. Repeat steps 8-10 until all sections have been raised and are secured.
12. Attach all hanging Guy Lines to their respective anchor. Align the mast vertically by tightening the Guy Lines. Make sure to work your way up the mast while tightening.


ROHN Telescoping Masts



ROHN H-Series Masts


Get Adobe Reader



This Buyers Guide has will answer many questions you may have on this Product Line. For more detailed information and Specification Sheets covering many aspects of Various Parts, Accessories and Installation Scenarios... Please refer to the "Telescopic Mast" Link appearing in the Footer of this Page Below!

Telescoping Masts are not recommended for commercial, CB or beam antenna installations.

My Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!