ROHN 65G Tower Guy Bracket Assembly R-GA65GD
ROHN GA65GD Tower Down Guy Bracket Assembly
Mounts to the ROHN 65G Tower at any Horizontal Brace. This Guy Assembly is used to attach guy wires to the ROHN 65G tower. It is recommended as an Attachment to a ROHN Tower Section for use at every guy level. The 65G tower can be used guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. As a guyed structure, it can rise to a maximum of 500 feet.
This Guy Bracket is an essential part of your ROHN 65G Guyed Tower Installation. Install the Guy Brackets at Heights indicated by the ROHN Catalog (Link above) as per REV. G or REV. F Wind Load Ratings. Trust No Substitutes. Buy ROHN. Buy American.
ROHN 45G Torque Bars for Use with Guy Bracket TB45D
- $330.00
ROHN TB45D Torque Bar Option for the GA45GD Guy Attachment
One Bar per Order. Three Bars would complete 3-way down guy. Modifies a GA45GD into a Torque Stabilizer Assembly that could be installed at existing Guy attachments on any horizontal brace as opposed to tower section joints. This Item will also require the 3/8 inch shackles to complete the upgrade...
Read More
Foundation and Base Plate Engineering Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a substitution for Engineering Conducted Specific to your Application. As always, Consult your Local Structural Engineer, Building Code and NEC for guidance to Properly Installing and Grounding your ROHN 65G Tower Installation.
ROHN Products, LLC manufactures Mounting Brackets to Attach to, and derive Support from, other Load Bearing Structures in the immediate vicinity of your ROHN 65G Tower in both Self-Supporting and Guyed Installations. These 65G Brackets are all Solid Galvanized Steel and could possibly convey considerable Load to the Structures of which they are attached. Assure yourself through Investigation that the Structure you wish to Bracket to will handle the ROHN 65G Tower's Load transferred to it as is, or can be Supplemented in some Engineered fashion as to match and counter the Load applied. As always, Consult your Local Structural Engineer and Building Code for guidance.
ROHN Products, LLC manufactures Mounts to Facilitate Attachment of Popular Antenna Designs for a Multitude of Applications, including but not limited to; Wireless Internet, Amateur Radio, Cellular Telephone, SCADA, Telemetry, PCS, Microwave Point to Point, Microwave Point to Multi-Point, MDS, MMDS, Broadcast, Off-Air TV, Satellite TV, DBS, WI-FI, Business Band or CB Antenna Installations. Most Antenna Mounts and Top Cap Section Design differences involve the Diameter and Length of the Masting used, or to be applied for Use with the Particular Antenna Dimensions and Wind Loading involved. Wind Loading, Antenna Loading and Wind Survivability ratings vs. Height Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a substitution for Engineering Conducted Specific to your Application. Contact Us with any Questions you may have regarding Use prior to Purchase.
All Information regarding the ROHN 65G Tower line, Parts and Accessories is as accurate and complete as we can possibly provide given that this Resource Offering is subject to change without Notice and is beyond Our Control.
This Buyers Guide will answer many questions you may have on this Product Line.
