Printer View Tell a Friend

ROHN 25G 50 Foot Bracketed Tower 25BRKT050

Highlights

Hot Dip Galvanized
Double Bolted Joints
Zig-Zag Rod Bracing
1-1/4" Steel Tubing
Side Rails
12-1/2" Equilateral
Triangular Design
Can be used in:
Bracketed Config

Bulk Quantities Available Here!

Price: $1,790.00
Manufacturer Code: 25BRKT050
Top Cap:
Grounding:
Qty:
Shipping: Can ship anywhere

ROHN 25BRKT050 Complete 50 Foot Bracketed Tower


This Product Order Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a Bracketed 50 Foot ROHN 25G Tower with EPA's (Effective Projected Area) Ratings for 70, 80 or 90 MPH (No Ice). Refer to Larger Image or click here to find information on Loading and EPA.

 

 

THIS KIT INCLUDES
25BRKT050
QUANTITY PART NUMBER DESCRIPTION
1 25AG2 Top Cap Tower Section
4 25G 10' Tower Section
1 25AJBK Bolt Kit for 25G Top Section
4 25JBK Bolt Kit for 25G Tower Section
2 HBUTVRO Heavy Duty Adjustable Universal House Bracket (18 - 36")
1 SB25G5 5' Base Section
1 ACWS Anti-Climb Warning Sign
1 ASSEMBLY GUIDE
OPTIONAL ACCESSORIES FOR 25G BRACKETED TOWER
QUANTITY PART NUMBER DESCRIPTION
2 BGK3G (OPTIONAL)

Tower Base Grounding Kit

This Kit Includes:

(1) 10' of #4 Copper Wire

(1) 5/8" x 8' Gopper Clad Ground Rod

(1) 5/8" Ground Rod Clamp

(1) 5/16" x 2 3/8" Grade 5 HDG Bolt

(1) 5/16" Hex HDG Nut

(1) Hy-Lug YA4C-L4 Compression Terminal Lug

 

The 25AG2 Top Cap Tower Section is the standard top section for the 25G Tower Series,

but can be replaced with the following options.

 

TOP CAP TOWER SECTION OPTIONS
PART NUMBER DESCRIPTION HEIGHT O.D.
25AG Top Cap 9' 2"
25AG1 Top Cap 9' - 3" 1.66"
25AG2 Top Cap* 9' - 9" 2.25"
25AG3 Top Cap 9' - 3 1/2" 2.25"
25AG4 FLAT Top Cap 8' - 3/16" FLAT
25AG5 Top Cap 8' - 1/2" 2.75"

 


This Item Ships LTL Freight ONLY...

 

Note:
 

When adding APL25G to order the Top Section will be replaced with a 25g 10' Section   


This 25G Tower is to be used in a Wall Bracketed Configuration according to the Use and Foundation Specifications.

 

This Height Configuration relies on a R-SB25G5 Embedded in a Concrete Foundation Specified by Engineering. As a Wall Bracketed, property mounted structure, a 70, 80 or 90 MPH rated 25G Tower can rise to a maximum of 100 feet.

 

Visit our knowledge base for more ROHN 25G Tower Configurations, Foundation and Grounding Detail Information.

 
 
Specification Sheet
Spec Sheet
ROHN 25G 50 Foot Bracketed Tower R-25BRKT050 Dual Side Arm Mount for 25g Towers - $159.95

3S-25MT-DUAL Side Arm Antenna Mount for Towers
 Made in the USA!Double Side Arm Mounts for lightweight broadband, Wifi ,scada and two-way antennas. .Extends Each Side  off the tower leg...

Read More
ROHN 25G 50 Foot Bracketed Tower R-25BRKT050 ROHN 25G 45G 55G 65G Universal Side Arm Mount - SA253UA - $225.00

ROHN SA253UA Universal Side Arm Antenna Mount for 25G 45G 55G 65G Tower
Double Side Arm Mounts for lightweight broadband, scada and two-way antennas. Fits 25G, 45G, 55G and 65G towers. Extends 3' off the tower with 2.25 inch O.D. Pipe...

Read More
ROHN 25G 50 Foot Bracketed Tower R-25BRKT050 ROHN 25G Side Arm Antenna Mount - UHF25G - $43.00

ROHN UHF25G Tower Side Arm Mount
For UHF & FM Whip Antennas. Fastens with Saddle Clamps. Projects your mast held in the clamp (up to 1.25 inches in Diameter with bolts supplied) to distance of 12 inches from the tubular side rail of the tower face to which it is attached...

Read More
ROHN 25G 50 Foot Bracketed Tower R-25BRKT050 ROHN 25G Tower Face Dish Mount (2" I.D) (2-3/8" O.D.) - DM25G2 - $290.00

ROHN DM25G2 Tower Face Dish Mount
Face Mount includes 2 Angled Steel Cross-Members that Bolt directly to any of the 3 Faces of a Standard 25G Tower Section. 5 Foot x 2 inch STD (2-3/8 inch O.D.) Pipe connects with U-bolts to 25G Tower Section Brackets....

Read More
ROHN 25G 50 Foot Bracketed Tower R-25BRKT050 ROHN 25G Tower Face Dish Mount (4" STD) (4-1/2" O.D.) - DM254 - $398.00

ROHN DM254 Tower Face 4.5 inch O.D. Pipe Dish Mount
Face Mount includes 2 Angled Steel Cross-Members that Bolt directly to any of the 3 Faces of a Standard 25G Tower Section. 5 Foot x 4 inch STD (4.5 inch O.D.) Pipe connects with U-bolts to 25G Tower Section Brackets...

Read More
ROHN 25G 50 Foot Bracketed Tower R-25BRKT050 ROHN 25G Tower DBS Dish Antenna Mount (1-1/2" O.D.) - KY2068A15 - $168.00

ROHN KY2068A15 Tower DBS Dish Antenna 1.50 inch Mount
for Mounting DBS Satellite Dish Antenna on 1.5 inch DIA, 3 foot long Side Arm Assembly of the ROHN 25G Tower...

Read More
ROHN 25G 50 Foot Bracketed Tower R-25BRKT050 ROHN 25G Tower DBS Dish Antenna Mount (1.66" O.D.) - KY2068A16 - $165.00

ROHN KY2068A16 Tower DBS Dish Antenna 1.66 inch Mount
for Mounting DBS Satellite Dish Antenna on 1.66 inch DIA, 3 foot long Side Arm Assembly of the ROHN 25G Tower...

Read More
ROHN 25G 50 Foot Bracketed Tower R-25BRKT050 ROHN 25G Anti-Climb Base Tower Section Panels R-25ACL3 - $598.00

ROHN 25ACL3 25G Anti-Climb Panels (3) for Base Tower Section
3 ACL Anti-Climb Panels (only) for Installation on an Existing 25G Base Tower Section...
This Item Ships LTL Freight ONLY...

Read More
Product isn't rated yet. Write a review.

ROHN 25G Bracketed Tower

The 25G Bracketed Tower can be installed adjacent to buildings using a bracket to secure the tower in one or two locations along the height of the structure.

Wind Loading, Antenna Loading and Wind Survivability ratings vs. Height Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a susbstitution for Engineering Conducted Specific to your Application. Contact Us with any Questions you may have regarding Use prior to Purchase. All Information regarding the ROHN 25G Tower line, Parts and Accessories is as accurate and complete as we can possibly provide given that this Resource Offering is subject to change without Notice and is beyond Our Control.


 

ROHN 25G Bracketed Tower

DESIGN NOTES:
1.
Tower designs are in accordance with approved national standard ANSI/EIA-222-F.
2. All towers must have "fixed" bases. Pinned bases may not be used.
3. Designs assume transmission lines symmetrically placed as follows:
25G Tower - One 5/8" Line on each face ( Total =3)
4. Antennas and mounts assumed symmetrically placed at tower apex.
5. Allowable antenna areas assume all round antenna members.
6. Allowable flat-plate antenna areas, based on EIA RS-222-C, may be obtained by multiplying areas shown by 0.6.
7. All brackets are to be ROHN (P/N HBUTVRO)
8. The interface of tower brackets to supporting structure is to be designed by others and must support a minimum horizontal force of 815 lbs.

FEATURES:
o
Completely hot-dip galvanized after fabrication to provide absolute corrosion protection.
o Cross bracing is formed by a continuous solid rod bracing in a zig-zag pattern for strength.
o Pre-engineered loading charts meet varying individual specs and site conditions.
o Typical uses include small dishes, broadband, security and two-way communication.


ROHN 25G Bracketed



ROHN G-Series Bracketed Towers


Get Adobe Reader



This ROHN G-Series Bracketed Towers Guide will answer many questions you may have on this Product Line. For more detailed information and Specification Sheets covering many aspects of Various Parts, Accessories and Installation Scenarios... Please refer to the "ROHN 25G Tower" Link appearing in the Footer of this Page Below!


GUIDELINES FOR THE PREPARATION OF A GEOTECHNICAL REPORT

I. PURPOSE AND INTENT

a) The intended purpose of these guidelines is to assist the customer and/or owner to retain the services of a Geotechnical Engineer.

b) It is not ROHN´s purpose or intent to supercede the Geotechnical Engineer´s knowledge, judgement and/or experience. It is the Geotechnical Engineer´s responsibility to add or delete from these items, based on local site conditions and other factors.

c) Additional information is provided in ANSI/TIA-222-G Annex G "Geotechnical Investigations".

II. DISCLAIMER

a) ROHN will not accept any liability, either expressed or implied, for the use of, and omissions in, these guidelines.

III. EXPLORATORY BORINGS

a) Borings should be taken at tower legs for self-supporting towers and at the base and anchor points for guyed towers. For small self-supporting towers, two borings may suffice. For large self-supporting towers, one boring should be taken at each tower leg. A "small" self-supporting tower is assumed to have a face width less than 20 feet and a compression load less than 50 kips per leg. For pole structures, one boring may suffice.

b) The minimum boring depth should be 30 feet for pole structures, self-supporting towers and guyed tower bases. For guyed tower anchors, the minimum depth should be 15 feet. The actual depth of boring must be determined by the Geotechnical Engineer based on reactions, soil conditions and the type of foundation recommended.

c) If borings cannot be advanced to the desired depth, rock corings should be taken. Rock Quality Designation (RQD) values and compressive strengths should be determined.

IV. GEOTECHNICAL REPORT

a) The following properties, for each soil layer encountered, should be determined by field or laboratory testing and summarized in the geotechnical report:

1. Soil classification and elevations
2. Standard penetration values
3. Unconfined compression strength
4. Angle of internal friction
5. Cohesion
6. "In-Situ" soil density and moisture content
7. Rock quality designation (RQD) and percent rock sample recovered
8. Other properties unique to site conditions

b) The following items should be discussed in the geotechnical report:

1. Geological description of site
2. Observed and expected ground water conditions
3. Expected frost penetration depth
4. Corrosion potential of soil and corrosion protection recommendations
5. Site access and potential construction difficulties
6. Dewatering or site drainage requirements
7. Backfill material recommendations
8. Settlement considerations
9. Additional information to aid foundation designer
10. Recommended types of foundations
11. Design parameters for uplift, download and lateral load
12. Factor of safety considered when allowable vs. ultimate design parameters are provided
13. Recommended construction techniques and inspections

Products   Recently Viewed
My Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!