Printer View Tell a Friend

ROHN 24 inch Single Mount Antenna Mast Bracket WM24S

Highlights

Galvanized Finish
14 Gauge Steel
24 inch Clearance
Adjustable from 1.25 to 2.75 inch DIA
Anti-Twist Set Screw
Lag Bolt Hardware not included
Wall Mount for:
   ROHN H20, H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850

Bulk Quantities Available Here!

Price: $48.00
Manufacturer Code: WM24S
Qty:
Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere

ROHN WM24S Antenna Mast 24 inch Heavy Duty Wall Mount Bracket


Made in the USA!Made in the USA!
(1 ea.) is designed to Wall Mount ROHN H50, H40, H30, H20 Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts. 14 gauge steel with set screw, adjustable for Clamping Antenna Masts from 1.25 to 2.75 inches in Diameter. This Bracket will Stand off any Antenna Mast within this Diameter range, but is not designed to support the weight of any Telescopic Antenna Mast off of the Ground. Bonding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance.
 
ROHN 24 inch Single Mount Antenna Mast Bracket R-WM24S EZ46-3 Pitch Pad Kit with Screws - $3.95
EZ 46-3 Pitch Pad Kit with Screws
Made in the USA!Made in the USA!
Complete with (3) 3 x 1.5" Moisture Barrier Pitch Pads and (6) 2 x 1/4" Hex Head Integral Washer Lag Screws for Weather-Proof Bracket Mounting to Exterior Surfaces. Most popular screw size for the majority of Antenna Mast Bracket Installations..

Read More
ROHN 24 inch Single Mount Antenna Mast Bracket R-WM24S EZ46-3PO Pitch Pad Moisture Barrier Kit - $1.90

EZ 46-3PO Pitch Pad Only Kit
Made in the USA!Made in the USA!
Comes with ( 3 Pitch Pads 3" x 1.5" only) for Weather-Proofing Bracket Mounting Installations on Exterior Surfaces...

Read More
ROHN 24 inch Single Mount Antenna Mast Bracket R-WM24S 28" Inch X 1.66" to 2" OD Satellite TV Antenna Mast Pole Combination | 5994 - $14.95

3 Star 5994 1.66 to 2 Inch O.D. Combination Satellite and Off-Air TV Antenna Mast
(28" Length) by 1.66" to 2.00 " O.D. 16 AWG Galvanized Antenna Mast (Mount Not Included)...

Read More
ROHN 24 inch Single Mount Antenna Mast Bracket R-WM24S 53" X 2.00" OD Satellite Dish Antenna Ground Mast Pole - $17.95

3 Star 5999    53 inch 2.00 O.D. Steel Satellite Dish Ground Pole Mast
Ideal as a Super DISH and Wild Blue Dish Antenna Mast for Ground or Wall mount Installation (Mount Not Included)...

Read More
Product isn't rated yet. Write a review.

Wall & Eave Mount Brackets

Wall & Eave Mount Brackets for Satellite TV Antenna Mast, Cellular Wireless Internet, Business Band and Telescopic Antenna MastsIt is Important to choose an Antenna Mount and Wall Mounting Location with a Picture of the Finished Antenna Installation in Mind. Be Sure to First select a location that lends itself to applying a Vertical, Cantilevered, Twisting Load without Compromising the Integrity of the Wall Material you affix to. Most Modern Exterior Decorative Wall Finishes most often do not have the Strength to Hold the Weight and Pressure of a Large TV Antenna under Wind Load without fail. Beams and Studs within the Wall are an Absolute Must to Locate when the Wall Composition is anything other than Solid wood or Concrete. Attach to these Strength Members. Further, Think about what's underneath the Wall exterior. Is it stronger, will it yield to Pressure over time as well? Sandwich additional Material (wood or steel) to the backside or both sides of the wall at the points where the mount attaches, as to distribute the load on relatively weak wall materials and to dampen vibration from Wind. Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification. Further, the NEC (National Electrical Code partly defines a good Ground connection as being as short as possible, you must affix a connection to a good Earth Ground prior to Premise entry or Bond to an existing one.

Products   Recently Viewed
My Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!