ROHN RT110H Complete 110' RT Heavy Duty Tower Kit
The new ROHN Heavy Series RT pre-engineered towers is able to meet numerous loading options for Structure Class I, II, or III. The tower design is based on Ultimate wind speed (115 MPH is the same as the common 90 MPH Rev G). The towers are made with pipe legs with angle bracing, and has an optional full size template available for the anchor bolts. All sections are knocked down which helps reduce shipping cost.
FEATURES
• Standard Series available in heights up to 190'
• High strength (50 ksi) legs, angle bracing and connection plates
• High strength structural bolts
• Round legs for easy mounting of antennas, mounts and other appurtenances
• Compatible with ROHN Standard accessories
• Hot-Dip Galvanized after fabrication
• Open cross section at ends of legs for complete galvanizing protection
• Knockdown bolted construction for efficient shipping, assembly and future upgrades
• Complete assembly drawings provided with the tower
• Standard and site-specific foundation designs available
• PE Certification available for standard or site-specific applications
• Custom tower designs available for heights up to 350'
Accessories available:
Rohn SA324A 3 Ft Side Arm Mount Straight or Tapered 2.3765 - 4.5" Legs with 2.375" Pipe
3' Side arm mount for Straight or Tapered Towers with 2.376" -4.5" O.D tower leg, with 2.38" O.D x 5' long mounting pipe....
Read MoreRohn SA624A 6 Ft Side Arm Mount Straight or Tapered 2.376" Legs with 2.375" Pipe
6' Side arm mount for Straight or Tapered Towers with 2.376" O.D tower leg, with 2.38" O.D x 5' long mounting pipe....
ROHN TT-WG-500 TUF TUG Wire Cable Grab Fall Arrestor System
A Component designed to work within the TUF TUG Safety System. This is a Passive Fall Arrestor Dual Cam Wire Grab that will attach to your Harness and grab the steel strand running length-wise, up and down the Tower that was installed for this purpose...
ROHN TTFBH-C/P TUF TUG Professional Climbing Harness with Seat
Part of the TUF TUG Safety System, Tower Climbing Harness...
ROHN S24HUM Straight Leg Dish Mount (2.38" - 4.50" OD)The Rohn S24HUM straight leg dish mount fit round leg sizes 2-3/8"O.D. - 4-50" O.D. , for easy mounting of antennas, mounts and other appurtenances ....
Read More