Printer View Tell a Friend

ROHN R-CPC1.5/2 Tower Base Ground Clamp


For Ground Connection to:
Base & Main Tower Sections

1.5" to 2" OD Pipe
Electroplated Tinned Bronze
Fits Conductors #6 Solid-250 MCM
Quick Connect Bi-Directional Design
UL Listed
Acceptable for Direct Burial

Bulk Quantities Available Here!

Price: $34.95
Manufacturer Code: CPC15/2
Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere

ROHN CPC1.5/2 Fixed Rigid Base Section Grounding Clamp

For Ground Connection to 55G and 65G Fixed Rigid Base and Main Tower Sections at a Tubular Rail (1.50 to 2.00 inch OD range). Lug connects to Solid/Stranded Copper or Woven Rope ground wire utilized in BGK3GGX REV. G Grounding Kits (not included)...


Made to connect to any of the three Leg Rail components of a 55G and 65G Main Tower or Fixed Rigid Base Sections in a Typical Tower Installation as these Tubes are within the nominal OD range above. This Clamp will also connect the Solid or Stranded Copper Ground Wire lead to the Ground Rod on the other end, completing your Grounding (Lightning Protection) System. Typically, 3 of these Clamps are used as most Systems will dictate that a separate Ground Connection be made to all three Tower Rail Tubes.

Product isn't rated yet. Write a review.

Ground your Coaxial Cable System

Commensurate with Coaxial Cable TV Antenna and Satellite TV Splitter Installation, you want to Ground your Cable TV or HDTV Antenna Coaxial Cable System Outside before bringing the TV Cable Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your Satellite Receiver and TV Set(s). The Integral Grounding Block designed onto most Outdoor Use Compatible Satellite Signal Splitter we sell will effectively convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Satellite TV, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.

Grounding & Bonding Are Important

Ground Blocks and Proper Grounding are an Important, often overlooked, aspect of Your Over-all Cable TV, HDTV or Satellite Antenna Installation and Safety. Proper Grounding can also Reduce the Reception of Interfering RF Signals. Grounding of Masts, Antennas, Cable TV and other RF Distribution Systems are covered by the NEC. Grounding can be as simple as a 12 AWG Ground Wire connected a short distance away to a 8 foot 5/8" DIA Copper Ground Rod (not supplied) or Bonded to the Existing Power Ground by the Power Meter installed on the side of your Home or Office. You may notice that most new Cable TV, Satellite and TV Antenna Installations are effected in this Manner. However, most State and some Local codes will contain requirements that supercede that of the NEC. Please Refer to Your Local Building and Electrical Codes...

Products   Recently Viewed
My Cart
Credit Cards Taken
Your shopping cart is empty!
Online Orders Only

New Store to Open 2024
Three Star Inc.
5750 Stuart Ave.
Jacksonville, FL 32254

Your Orders are Currently being Processed and Shipped out of Richmond, VA.

We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!