Printer Friendly Tell a Friend

ROHN Non-Penetrating Satellite DISH Roof Mount NPPK

No penetration on roof surface
Galvanized for corrosion protection
Designed for concrete block ballast
mount Goes together quickly
Minimum of bolted connections
Optional roof pads/mats available
Made in the USA!

Made in the USA!
Price: $430.00
Manufacturer Code: NPPK
Stock Level:
Availability: Usually ships in 2 weeks
Shipping: Can ship only within USA
ROHN NPPK Non-Penetrating Dish Antenna Roof Peak Mount
Made in the USA!Made in the USA!
This new Non-Penetrating peak roof mount is a great solution for Broadband antennas and satellite TV dishes. The adjustable mounting plate can be center mounted or to one side as needed to accommodate your satellite TV dish mounts. Our 1LG mount with a base and 1-1/4" mounting tube is an option for the NPPK. The mount comes standard with double trays on each side. Use (2) optional FRMMAT for a protective barrier between the mount and the roof.

Note: Height and Antenna Loading capability are dependant upon ballast weight. You need to Consult an Engineer to determine the Load Bearing Capability of the roof that you are entertaining such an Installation . It is Important to choose a Mount and Mounting Location with a Picture of the Finished Installation in Mind. Be Sure to First select a location that lends itself to applying a Load without Compromising the Integrity of the Material you affix to. Most Decorative Finishes most often do not have the Strength to Hold a Weight or Pressure without fail. Further, Think about what's underneath the exterior. Is it stronger, or will it yield to Pressure over time also? Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied in cantilever also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification.
ROHN R-NPPK Non-Penetrating Dish Antenna Roof Peak Mount Protective Rubber Mat Layer for Non-Penetrating Mount - $20.95
VMP FRM-MAT Satellite Dish Non-penetrating Roof Mount Rubber Protective Mat
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/32 thick Pad measures roughly 36 wide by 42 inches long, trims neatly, place underneath Frame of Non-Penetrating mount, on top of Roof surface...

ROHN R-NPPK Non-Penetrating Dish Antenna Roof Peak Mount Wingard DS-3000 J Pipe Mount for Satellite Dish TV Antenna - $23.00
Winegard DS-3000 Universal Home "J" Dish Off-Air Antenna Mount
Designed for wall or roof mounting most Off-Air Antenna and DirecTV, DISH Network Dishes up to 20" in Diameter...

Product isn't rated yet. Write a review.

Products   Recently Viewed
Your Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!