Printer Friendly Tell a Friend

ROHN FRM150 Non-Penetrating Roof Mount 1.50 inch OD Mast

Highlights
No penetration on roof surface
Galvanized for corrosion protection
Designed for concrete block ballast
mount Goes together quickly
Minimum of bolted connections
Optional roof pads/mats available
Price: $115.29
Manufacturer Code: FRM150
Qty:
Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere
ROHN FRM150 Non-Penetrating Roof Mount with 1.50" OD x 30" Antenna Mast Pole
Made in the USA!Made in the USA!
This roof mount is able to support various Antenna EPA's depending on wind and Ballast load (see details). The base of the roof mount is 3 ft square with a 16" tray to fit concrete blocks, typically used as ballast for placement of various TV, Radio, Microwave, WiFi and Wireless Internet Antennas. The base mount and mast tube are 16 gauge Pre-Galvanized for corrosion protection and goes together quickly. Antenna and wind loads vs ballast weight are found in the spec sheet below.


Note: Height and Antenna Loading capability are dependant upon ballast weight. You need to Consult an Engineer to determine the Load Bearing Capability of the roof that you are entertaining such an Installation. Please refer to the Chart (pdf link above) which is a great place to start in determining whether your circumstances qualify for such an installation. If you cannot find someone local to evaluate the registered plans for your Flat Roof Structure, ROHN may be able to put you in contact with someone who can.
Specification Sheet
Spec Sheet
manufacturer
Rohn
Product isn't rated yet. Write a review.

Maintenance Free Non-Penetrating Roof Mounts

3 Star Inc's non-penetrating roof mounts meet a variety of communication tower needs. Our mounts will work for cellular, PCS, wireless cable, microwave, wireless internet, WiFi hot spots, DBS, MDS, MMDS and UHF/VHF reception.

Our non-pen roof mounts are designed and engineered to handle the job of getting above ground interference. Each mount has been researched and developed to serve a specific purpose.

Our non-penetrating roof mounts are either pre-galvanized or powder coated after fabrication meaning our roof mounts won't rust. With professionally engineered construction, you can be assured you're getting a virtually maintenance-free product built to the highest standards.

Non-pen mount features include:

  • Offer both Fixed Mounts and Ballast Roof Mounts.
  • Pre-galvanized for corrosion protection.
  • Varied mast heights available.
  • Varied mast pipe O.D. available.
  • Quickly shipped and quickly assembled.
  • Minimum bolted connections.
  • Engineering ballast tables available.
  • Optional roof pads and mats available.
  • Some models are UPS shippable.

Products   Recently Viewed
Your Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!