Printer View Tell a Friend

RG7 Quad Shield CAT5E Aerial Cable 1000' CS

Highlights
PVC Jacket
FLooded
(2)100% Foil Coverage
(1)40% Braid
(1)60% Braid
QUAD Shield!
5 pr. 22 AWG Telco
Integral 0.083 Messenger

Bulk Quantities Available Here!

Price: $259.95
Manufacturer Code: F7SSVV-APD
Stock Level: 1
Qty:
Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere
CommScope F7SSVV-APD 1000' RG-7 Coaxial Cable -w- CAT5E Aerial Messengered
BONDED LAMINATED ALUMINUM TAPE, 60% BRAID, LAMINATED ALUMINUM TAPE, 40% BRAID, FLOODED for Weather, PVC JACKET... CommScope F7SSVV-APD is Commercial Grade for Aerial Combination Telco Broad-Band Distribution Systems. RG-7 Coaxial and 5 pair of 22 AWG Service Wire all in one Integral package with a Sturdy Messenger.


Note: SuperShield (Quad Shield) - Taking the Tri-Shield construction one step further, this construction adds an additional layer of shielding braid to provide the greatest strength, durability and immunity from network interference. Provides low attenuations for service drops greater than 150 feet in length. Quad Shield Provides Maximum Shielding Integrity in a Pliable Coaxial Drop Package. This is the same Commercial Grade Low Loss Cable your local Cable TV company uses to get from the Telephone Pole to your House. Our Customers use this in their MHP Hotel Motel SMATV Cable TV, Video Surveillance and Hi Speed Internet Systems to distribute around Larger Properties.
Specification Sheet
Spec Sheet
Length
1000
Jacket
PVC
Options
Siamese
Options
Messenger
RG-7 CommScope F6SSVV Coaxial Cable Broadband RG7 Quad Shield PPC AquaTight EX7 Universal RG7 Cable F Connector - $2.20

PPC EX7 RG7 Universal F Connector for RG7 Coaxial Cable
(1 each/unit) This Hard to Find Connector fits on all RG7 Coaxial Cables. Use this Connector for Satellite and Cable TV Installations. Moisture Migration AquaTight® Barrier built into connector. Use VT200, VT300, CATAS, CAT-AS-EX, LNS5000, LNS5010 Compression Tools...

Read More
Product isn't rated yet. Write a review.

This RG11 Cable Product is designed for Aerial Suspension and Usage. It Features an Integral Steel Messenger in Siamese Configuration with the Coaxial Cable Jacket. This integral messenger precludes the need of the coaxial cable itself being utilized as the structural component in the suspension of the cable in the Air, from point to point. Steel messenger is separated and stripped away from the coaxial cable at the point of termination, and terminated with a suspension clamp that will loop around a "J" Hook (or equivalent) or simply wrapped around a screw-in "P" Hook for the same purpose. RG11 (RG-11) is to 75 Ohm as RG213 or RG214 is to 50 Ohm cable. RG11 Cable featuring 60% Braided Shield is comprised of an Aluminum Foil bonded to the Foam Dialectric with Aluminum Braided Shield with 60% coverage. Quad Shield RG11 would denote alternating Aluminum Foil and Aluminum Braided Shield Layers, starting with the Bonded Foil Layer around the Foam Dialectric, with the best Quad Shield having 2 Layers of Braided Aluminum Shield, one of 60% and the 2nd at 40%. Tri-Shield RG11 will have 77% Braided Aluminum Shield Coverage Between 2 Layers of Aluminum Foil Shield, the 1st Foil Layer being Bonded to the Foam Dialectric. RG11 is the lowest loss Flexible Braided Shield Drop cable Commercially Manufactured for Satellite TV, TV Antenna and Cable TV usage. Use for distances over 150 feet or when every dB counts. For Cable with less loss than RG11, one would then have to avail themselves to Hardline Coaxial with a Single Solid Shield (typically Aluminum) that is pricey, but delivers commensurate Results for the Money. Most all RG11 Manufactured uses Aluminum Braided Shield, the difference of note being the amount of Aluminum Braid Coverage and the composition of the Center Conductor; Solid Copper vs. Copper Clad Steel. Copper Clad Steel will suffice in almost any utilization scenario, however most Satellite TV Operating companies will require Solid Copper Center Conductor to be used by their respective Sub-Contractor Installers for Maintainence and Warranty issues. This is due to the DC Voltage component being fed from the Receiver back to, and Powering the LNB(f)s mounted on the Satellite Dish. Unless the run is extremely long and the connectors applied are of dubious Quality, the DC Loop Resistance difference between Solid Bare Copper and Copper Clad Steel is negligible.

Products   Recently Viewed
My Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!