CommScope F11SSVV 1000' REEL RG11 Quad Shield Coaxial Cable
75 Ohm Coaxial Drop Cable, Series 11, black PVC jacket For Distribution of Master antenna, CATV, Video and Satellite Signals . This Cable Features a PVC Jacket over Two layers of Bonded Foil and (2) layers that total 100% Braid, Bonded Foam Dialectric with a Copper Clad Steel Center Conductor. Perfect for HDTV, DTV, DBS, Cable TV, Master Antenna and Satellite Master antenna Applications with 1.0 GHz Bandwidth. Can Also be Utilized as Signal Feed Transmission line from Towers, Dishes, Antennas and Telephone Poles to Home, Office and Premise.
|Center Conductor Material||Copper-clad steel|
|Dielectric Material||Foam PE|
|Inner Shield (Braid) Coverage||60 %|
|Inner Shield (Braid) Gauge||34 AWG|
|Inner Shield (Braid) Material||Aluminum|
|Inner Shield (Tape) Material||Aluminum/Polymer/Aluminum (APA) bonded|
|Outer Shield (Braid) Coverage||40 %|
|Outer Shield (Braid) Gauge||34 AWG|
|Outer Shield (Braid) Material||Aluminum|
|Outer Shield (Tape) Material||Aluminum/Polymer/Aluminum (APA)|
TnB SNS11AS Snap N Seal Coaxial F Connectors for RG11
(1 each/unit) All-shield coaxial cable connector that features a 360 degree compression seal. Snap-N-Seal drop connectors for 11 Series cable feature industry leading compression technology and Time proven dependability for Satellite and Cable TV...
PPC EX11 RG-11 Universal F Connector for RG11 Coaxial Cable
(1 each/unit) This Most Economical Universal Connector fits on all RG11 Coaxial Cables with 60% braid, Tri-shield or Quad shield. Use this Connector for Satellite and Cable TV Installations. Moisture Migration AquaTight® Barrier built into connector. Use VT200, VT300, CATAS, CAT-AS-EX, LNS5000, LNS5010 Compression Tools...
This RG11 Cable Product is designed for General Interior and Exterior Usage (NOT for Direct Burial). It Features a PVC Jacket with various layers of shield. RG11 (RG-11) is to 75 Ohm as RG213 or RG214 is to 50 Ohm cable. RG11 Cable featuring 60% Braided Shield is comprised of an Aluminum Foil bonded to the Foam Dialectric with Aluminum Braided Shield with 60% coverage. Quad Shield RG11 would denote alternating Aluminum Foil and Aluminum Braided Shield Layers, starting with the Bonded Foil Layer around the Foam Dialectric, with the better Quad Shield having 2 Layers of Braided Aluminum Shield, one of 60% and the 2nd at 40%. Tri-Shield RG11 will have 77% Braided Aluminum Shield Coverage Between 2 Layers of Aluminum Foil Shield, the 1st Foil Layer being Bonded to the Foam Dialectric. RG11 is the lowest loss Flexible Braided Shield Drop cable Commercially Manufactured for Satellite TV, TV Antenna and Cable TV usage. Use for distances over 150 feet or when every dB counts. For Cable with less loss than RG11, one would then have to avail themselves to Hardline Coaxial with a Single Solid Shield (typically Aluminum) that is pricey, but delivers commensurate Results for the Money. Most all RG11 Manufactured uses Aluminum Braided Shield, the difference of note being the amount of Aluminum Braid Coverage and the composition of the Center Conductor; Solid Copper vs. Copper Clad Steel. Copper Clad Steel will suffice in almost any utilization scenario, however most Satellite TV Operating companies will require Solid Copper Center Conductor to be used by their respective Sub-Contractor Installers for Maintainence and Warranty issues. This is due to the DC Voltage component being fed from the Receiver back to, and Powering the LNB(f)s mounted on the Satellite Dish. Unless the run is extremely long and the connectors applied are of dubious Quality, the DC Loop Resistance difference between Solid Bare Copper and Copper Clad Steel is negligible.