Your Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!
Printer Friendly Tell a Friend

8-Way Cable TV Antenna MDU Splitter DSU-8

Highlights

5-900 MHz. Bandwidth

45 dB port-to-port isolation*

35 dB output return loss*

Power Passing all Ports

Enhanced Sub Band Performance

Chromatic anticorrosive

Epoxy Sealed backplate

*(Return Band)

Price: $9.95
Manufacturer Code: DSU-8
Stock Level: 0
Availability: Discontinued
Shipping: Can ship anywhere
Qintar DSU-8 8-Way Splitter for Cable TV Antenna Signal Distribution 1 GHz
Power Passing All Ports and High Quality Zinc Die Cast case makes Qintar DSU-8 series Splitter Ideal for MDU Applications.


Note: This is one of those Splitter you would find or use inside of those steel lock-boxes on the side of an Apartment complex, or the little Grey box on the side of your Home or Office that the Cable TV company installed. It features Vertical Port F Connections. Its typically used inside of these little boxes because it's easier to connect/disconnect the cables when all the F connection Ports are facing in the same direction. So when you are mounting a 4-Way Splitter In a tight space without a lot of room around it for the RG6 Coaxial Cable to make connection, this is the one you want! It will pass Forward and Return signals; making it perfect for Splitting Cable TV with High-Speed Internet Connection Signals. The Voltage Protection also makes it suitable for splitting HD TV Antenna Signals as well. The Flat F Connector ends means that the connection to the RG coaxial cable you use (RG6 or RG11) is solid, secure and doesn't slip or back off after tightened with appropriate force (most Coaxial Cable Manufacturers specify in inch/pounds).
Average Customer Rating: 5 based on 1 reviews. Write a review.

Positive Customer Review
bob11919 (Guest)
Fast Shipping, Good communications!
Fast Shipping, Good communications, Great price - Good company!

8-Way Splitters are typically the Part you would use to take One (1) cable Feed and "Split" it into Eight (8) in order to Provide Signal to 8 Independant Devices, or a Total of Eight Cables to Feed Multiple Subscriber Units. If Your Distribution Run Passes Distance in Between each Feed Outlet on the Run, Maybe You need to consider Dividing the Split Locations along the Run with Multiple Split Devices or Upgrade to an Out-side Plant (OSP) Architecture. Please be Sure to Select the Appropriate Splitter not just By Manufacturer and Price. But Rather, Consider the Specifics of Bandwidth, Packaging (Indoor vs. Outdoor), Loss, Powering Requirements Up/Down-Stream and the Overall Needs of the Final System You Wish to Create...

If you are adding a splitter to an existing Cable TV or Antenna feed, you may need to compensate for the loss that you are about to introduce. The gain of a Line Amplifier should be selected to zero out the loss that follows it. In other words, if you have fifty feet of cable and a two-way splitter, then a 10 db amplifier will be fine. Conversely, if you have an eight-way splitter and hundreds of feet of cable, you will need an amplifier with a higher gain. Just as in the case of a Pre-Amplifier, however, bigger is not always better.

Commensurate with Coaxial Cable TV Antenna Splitter Installation, you want to Ground your Cable TV or HDTV Antenna Coaxial Cable System Outside before bringing the TV Cable Inside. This way, Lightning Strikes and Power Surges have an opportunity to arrest before reaching your TV and Entertainment Electronics. The Integral Grounding Block designed onto every Outdoor Use Compatible RF Signal Splitter we sell will effectively convey this unwanted Electrical Energy to a Ground Rod via a Copper Ground Wire that you Install (not included). Consult your Local Building Code and NEC for guidance to Properly Grounding your HD TV Antenna, Cable TV, WI-FI, Wireless Internet, Business Band, CB or Amateur Radio Antenna Installation.

Products   Recently Viewed