ROHN 25G 80 Foot Bracketed Tower 25BRKT080 Print this pagePrint this page
ROHN 25G 80 Foot Bracketed Tower 25BRKT080
Price: $1,504.00

Top Cap AG; AG1 (+$20.00); AG2; AG3 (+$50.00); AG4 (+$65.00); AG5 (+$25.00)
Grounding BGK3G x 2 (+$69.95)
Hot Dip Galvanized
Double Bolted Joints
Zig-Zag Rod Bracing
1-1/4" Steel Tubing
Side Rails
12-1/2" Equalateral
Triangular Design
Can be used in:
Bracketed Config

Note: Bracketed Towers are Specifically useful when your project calls for a Tower to rise above the building's height, but for various asthetic and Weight Bearing Load considerations, cannot construct the tower upon the roof itself. The Bracket Tower Scenario relies on the Building's Load Bearing Outside Wall, using a portion of it to bolt on the base and first bracket, establishing a secure cantilever, whereupon the tower can rise as a Self-Supporting Structure above the building's roof without unsightly guy wires or a ground presence below. Self-Supporting Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the weight of the Foundation and the cohesive of the soil to counter Tower tipover, as well as the strength of the tower members to withstand these Forces against them. ROHN Tower Kits are designed based on assumptions made regarding Windspeed, EPA (Antenna Load), Height, Standard Soil Conditions, Surrounding Environment and Duty. The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project. It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, and/or find the Tower Quote Data Sheet Form by clicking the link that appears on the Footer of this Page Below. *Per Rev G requirements, any structure greater than 10 ft requires a climber safety device.
Availability: Ships out in 2 -3 days!
Shipping: Can ship only within USA
Weight: 460 lb
ROHN 25GB080 Complete 80' Bracketed 25G Tower Kit
This Product Order Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a Bracketed 80 Foot ROHN 25G Tower with EPA's (Effective Projected Area) Ratings for 70, 80 or 90 MPH (No Ice). Refer to Larger Image, Brochure or Footer Links at the Bottom of the Page below for Ice Loading and EPA Information.

(7) 25G
(1) 25AG2
(1) SB25G5
(2) BGK3G Kits (optional)

This 25G Tower is to be used in a Wall Bracketed Configuration according to Use and Foundation Specifications in the ROHN Catalog. This Height Configuration relies on a SB25G5 Imbeded in a Concrete Foundation Specified by Engineering. As a Wall Bracketed-Properly Mounted Structure, a 70, 80 or 90 MPH rated 25G Tower can rise to a maximum of 100 feet. Consult ROHN 25G Catalog Links of the Footer Section at Bottom of Page for more ROHN 25G Tower Configuration, Foundation and Grounding Detail Information.

Specification Sheet
Spec Sheet spec. sheet