ROHN 25G 10 Foot Self Supporting Tower 25SS010 Print this pagePrint this page
ROHN 25G 10 Foot Self Supporting Tower 25SS010
Price: $325.00

Top Cap AG; AG1 (add $20.00); AG2; AG3 (add $50.00); AG4 (add $65.00); AG5 (add $25.00)
Grounding BGK3G x 2 (add $69.95)
Hot Dip Galvanized
Double Bolted Joints
Zig-Zag Rod Bracing
1-1/4" Steel Tubing
Side Rails
12-1/2" Equalateral
Triangular Design
Can be used in:
Self Support Config

Note: Self-Supporting Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the weight of the Foundation and the cohesive of the soil to counter Tower tipover, as well as the strength of the tower members to withstand these Forces against them. ROHN Tower Kits are designed based on assumptions made regarding Windspeed, EPA (Antenna Load), Height, Standard Soil Conditions, Surrounding Environment and Duty. The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project. It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, and/or find the Tower Quote Data Sheet Form by clicking the link that appears on the Footer of this Page Below. *Per Rev G requirements, any structure greater than 10 ft requires a climber safety device.
Availability: Usually ships in 1 week
Shipping: Can ship only within USA
Weight: 120 lb
ROHN 25SS010 Complete 10' Self-Supporting 25G Tower Kit
This Product Order Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a Self-Supporting 10 Foot ROHN 25G Tower with EPA's (Effective Projected Area) Ratings for 70, 80 or 90 MPH (No Ice). Refer to Larger Image, Brochure or Footer Links at the Bottom of the Page below for Ice Loading and EPA Information.

Manufacturer Code: 25SS010
125AG2Top Cap Tower Section
125AJBKBolt Kit for 25G Top Section
1SB25G55' Base Section
1ACWSAnti-Climb Warning Sign

Tower Base Grounding Kit

This Kit Includes:

(1) 10' of #4 Copper Wire

(1) 5/8" x 8' Gopper Clad Ground Rod

(1) 5/8" Ground Rod Clamp

(1) 5/16" x 2 3/8" Grade 5 HDG Bolt

(1) 5/16" Hex HDG Nut

(1) Hy-Lug YA4C-L4 Compression Terminal Lug

The BGK3G Grounding Kit is an OPTIONAL kit for the ROHN 25G "Self-Supporting" Tower Series.

The 25AG2 Top Cap Tower Section is the standard top section for the 25G Tower Series,

but can be replaced with the following options.

25AGTop Cap9'2"
25AG1Top Cap9' - 3"1.66"
25AG2Top Cap*9' - 9"2.25"
25AG3Top Cap9' - 3 1/2"2.25"
25AG4FLAT Top Cap8' - 3/16"FLAT
25AG5Top Cap8' - 1/2"2.75"

This 25G Tower is to be used in a Self-Supporting Configuration according to Use and Foundation Specifications in the ROHN Catalog. This Height Configuration relies on a SB25G5 Embedded in a Concrete Foundation Specified by Engineering. As a Free-Standing, Self-Supporting Structure, a 70, 80 or 90 MPH rated 25G Tower can rise to a maximum of 40 feet. Consult ROHN 25G Catalog Links of the Footer Section at Bottom of Page for more ROHN 25G Tower Configuration, Foundation and Grounding Detail Information.

Specification Sheet
Spec Sheet spec. sheet