ROHN 25G Complete 40 Foot 90/ 70 MPH Guyed Tower 25G90R040

ROHN 25G90R040 Complete 25G 40 Foot 90 MPH Guyed Tower

The 25G90R040 25G Guyed Tower Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a 40 Foot ROHN 25G Tower with EPA Ratings (Effective Projected Area) for 90 MPH (Rev. G).

This Tower is EPA rated for 90 MPH (Rev. G) and 70 MPH (Rev. F).

Refer to larger image for EPA Information.

This Kit Includes the Following: Table (1) – Complete Kit List

ROHN 25G90R040 Complete 25G 40 Foot 90 MPH Guyed Tower
QUANTITY	PART NUMBER	DESCRIPTION
1	25AG2	Top Cap Tower Section
3	25G	10’ Tower Section
1	25AJBK	Bolt Kit for 25G Top Section
3	25JBK	Bolt Kit for 25G Main Tower Section
1	BPC25G	Concrete Base Plate - Standard
1	GA25GD	Guy Wire Bracket
175 Ft	3/16” EHS	7 Strand - Extra High Strength (EHS) Guy Wire – 3/16”
3	PLP-115	Yellow Plastic Guard for Guy Wire
6	BG2142	3.16” Big Grip Pre-Formed Dead-Ends
6	5/16THH	5/16” Heavy-Duty Thimble
3	1/2TBE&J	1/2” x 12” Turnbuckle – Eye to Jaw
3	TBSAFETY	Turnbuckle Safety Wire and Clamp Kit This Kit Includes (1) 14001 – 1/4” Galvanized U-Bolt Clip (1) 1/44GW15 – 1/4” x 15’ Guy Wire
3	GAC3455TOP	Anchor Rod with 5 Hole Equalizer Plate
1	AGK1GGX	Anchor Rod Grounding Kit This Kit Includes (3) 15’ of 7/16” EIP IWRC RRL (3) 5/8” x 10’ Galvanized Ground Rod (aka 6260) (3) 3/4” Clamp No. 8034 WB (aka 340016) (3) CPC.5/.75 – Anchor Rod Clamp
3	BGK3GGX	Tower Base Section Grounding Kit This Kit Includes (1) 15’ of 7/16” EIP IWRC RRL (1) 5/8” x 10’ Copper Clad Ground Rod (1) 3/4” Ground Rod Clamp (1) CPC1/1.25 – Anchor Rod Clamp
3	CPC.5/.75	Anchor Rod Clamp
1	3/4x12PP	Pier Pin Insert for 25G Tapered Base
1	Assembly Guide

The 25AG2 Top Cap Tower Section is the standard top section for the 25G Series,

but can be replaced with the following: Table (2) – Top Cap Tower Options

Alternative Top Caps for the ROHN 25G Tower Series
PART NUMBER	DESCRIPTION	HEIGHT	O.D.
25AG	Top Cap Tower Section	9’	2”
25AG1	Top Cap Tower Section	9’ – 3”	1.66”
25AG2*	Top Cap Tower Section (Standard Option)	9’ – 9”	2.25”
25AG3	Top Cap Tower Section	9’ – 3 1/2”	2.25”
25AG4	Top Cap Tower Section (Accessory Shelf Top Cap)	8’ – 3/16”	FLAT
25AG5	Top Cap Tower Section	8’ – 1/2"	2.75”

General Information

This 25G Tower is to be used in a Guyed Configuration according to Specifications in the

ROHN Catalog.

As a Guyed Structure, a 90 MPH Rated Tower can rise to a maximum of 190 Feet. Refer to ROHN Catalog for Foundation and Grounding Detail Information.

Consult ROHN Catalog PDFs in the Specifications Tab for more ROHN 25G Tower Details.

This Item Ships LTL Freight ONLY...

Warranty Sheet