ROHN 25G Tower Torque Arm Stabilizer Assembly R-TA25 Print this pagePrint this page
ROHN 25G Tower Torque Arm Stabilizer Assembly R-TA25
Price: $478.00

Highlights:

Hot Dip Galvanized
Bolt-on Part
Anti-Twist Device
Attaches to Tower Section Joint
Provides 6-way Guy



Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere
Weight: 36 lb
Description

ROHN TA25 Tower Torque Arm Stabilizer Assembly


Anti-twist device located in the area of the Microwave or other Focused Beam antennas to provide six-way guying. Bolts to tower at any section joint and attached with joint bolts. Must be installed as sections are joined together. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. As a guyed structure, it can rise to a maximum of 190 feet. Consult ROHN Catalog Links at Footer Section below for ROHN 25G Tower Details.

 

NOTE:

 

You need (6) 1/2" Shackles to attach to the TA25 Torque Arm Assembly.  Big Grip and thimble would go around the shackle to terminate the wire.  The Big Grips and Thimbles will depend on the size of the Guy wire to be used 3/16EHS ,1/4EHS or 5/16"EHS ( See Spec Sheet for Illustration ) 

 


 

Locate this Anti-twist device in the area of your Microwave Dish or Focused Beam Broadcast and Receive Antennas. Provides six-way guying, so be sure to account for the Total number of Guy wires appearing at each Tower Ground Anchor Location. Bolts to tower at any section joint, attached with joint bolts and must be installed as sections are joined together, so plan the Antenna Locations on the 25G Tower Before Assembly (Engineer the Wind Load accordingly). Install the Torque Arm Stabilizers as to not impede Installation or reception to other Antennas located on the same Tower or Adjacent Towers. Buy ROHN. Buy American.

 

 

Warranty Sheet

 

Specification
Specification Sheet
Spec Sheet spec. sheet




specifications

Images

ROHN_TA25_800x600t.jpg
ROHN_TA25_800x600t.jpg
 

Accessories