FRM-238 Non-Penetrating Roof Mount with 60 inch x 2.38 inch OD Mast Print this pagePrint this page
FRM-238 Non-Penetrating Roof Mount with 60 inch x 2.38 inch OD Mast
Price: $75.95

Highlights:

EZ-FRM Base 12ga.
60" - 2.38" Mast
Pre-Galvanized
Off-Air Antennas
Wireless Antennas

Bulk Quantities Available Here!



Note: Height and Antenna Loading capability are dependant upon ballast weight. You need to Consult an Engineer to determine the Load Bearing Capability of the roof that you are entertaining such an Installation . It is Important to choose a Mount and Mounting Location with a Picture of the Finished Installation in Mind. Be Sure to First select a location that lends itself to applying a Load without Compromising the Integrity of the Material you affix to. Most Decorative Finishes most often do not have the Strength to Hold a Weight or Pressure without fail. Further, Think about what's underneath the exterior. Is it stronger, or will it yield to Pressure over time also? Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied in cantilever also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification.
Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere
Weight: 36 lb
Description
3 Star Inc FRM238 Non-Penetrating Roof Mount with 2.38" OD x 60" Antenna Mast Pole
Made in the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized 12 ga. steel, uses 6 standard concrete blocks to anchor, 35" x 35" base. Mast pipe length will be 58" actual length for shipping purposes.
This Pre-Galvanized Finished Non-Penetrating Roof Mount Base allows you to install DBS, TV Antenna and WiFi Internet systems on flat roofs where no holes can be drilled. The heavy steel base is 35" square. Pre-Galvanized Finished (thick) Steel Mast is 2.375 inches in Outside Diameter and 57 inches in Height from Base. Perfect for use with DirecWAY and StarBand systems. Can be Used as a Penetrating Mount without Ballast when Field Drilled to use optional Pitch Pad Kit. Compares to Other Name Brand Hardware at Half the Price. Optional FRMMAT (Mat) and FRMPAD (PAD) available



Specification
Specification Sheet
Spec Sheet
Pole Diameter 2.38
Pole Height 57
manufacturer 3 Star

Images

EZ-FRM-238_800x600t.jpg
EZ-FRM-238_800x600t.jpg