Non-Penetrating Roof Mount for Light Antennas EZ NP-60-125 Print this pagePrint this page
Non-Penetrating Roof Mount for Light Antennas EZ NP-60-125
Price: $69.25

Highlights:

EZ NP Base

60" - 1.25" Mast

60" x 1.25" Swaged Add On 

Pre-Galvanized



Note: Height and Antenna Loading capability are dependant upon ballast weight. You need to Consult an Engineer to determine the Load Bearing Capability of the roof that you are entertaining such an Installation . It is Important to choose a Mount and Mounting Location with a Picture of the Finished Installation in Mind. Be Sure to First select a location that lends itself to applying a Load without Compromising the Integrity of the Material you affix to. Most Decorative Finishes most often do not have the Strength to Hold a Weight or Pressure without fail. Further, Think about what's underneath the exterior. Is it stronger, or will it yield to Pressure over time also? Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied in cantilever also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification.
Availability: Ships out in 2 -3 days!
Shipping: Can ship anywhere
Weight: 30 lb
Description
Easy Up EZ NP-60-125 Non-Penetrating Roof Mount with 1.25" OD x 60" Antenna Mast Pole
Made in the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized steel, uses 6 standard concrete blocks to anchor, 29 x 35.5" base, with 1.25" mast 60" in length. For light antenna loads needing 10 feet in height, use this mount in combination with (2)EZ 5-16S swaged 1.25" OD masts, several EZ 50 turnbuckles, some 620 guy wire and the EZ 43-A Guy Ring! (available separately) Also can be used as a Non-Penetrating base for an H20 or H30 Telescopic mast, though Down Guys will still be required as per Factory recommendations.



Specification
Specification Sheet
Pole Diameter 1.25
Pole Height 60
manufacturer Easy Up

Images

EZ-NP-60-125.jpg
EZ-NP-60-125.jpg