30 inch Telescopic TV Antenna Mast Wall Mount Bracket Print this pagePrint this page
30 inch Telescopic TV Antenna Mast Wall Mount Bracket
Price: $24.95

Highlights:

1 x Pre-Galvanized Finish Bracket
30 inch Clearance
Adjustable 1.25 to 3 inch DIA
3rd Support Leg
Wall Mount for:
   ROHN H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850



Note:

This "Y" Antenna Mast Wall Mount Bracket with 3rd Leg Support is Designed for Wall Mount Support of Antenna Masts of all Diameters from 1.25 inch to 3 inches with 30 inches of clearance from the Wall with the added reinforcement of a 3rd leg that goes to transfer the weight load leverage to the wall, but not the weight of a Telescopic Antenna Mast or ANY Mast greater than 10 Feet in Height (Depending on Antenna size!) off of the Ground and on the Wall alone. Use a Ground Plate like EZ32A or GTMBL to mount the Bottom of a Telescopic Antenna Mast from the ground up, with the Wall Bracket maintaining vertical alignment and clearance from the Wall to pass Roof edge. These Mounts do not replace or otherwize reduce the need for proper guying of the Telescopic Antenna Masts. As with all Masts, Guy wire support and Grounding are Critical to Antenna Survival.


Availability: Ships out in 2 -3 days!
Shipping: Can ship anywhere
Weight: 8 lb
Description

EZ 3S-WM-30W Telescopic TV Antenna Mast 30" Single Wall Mount Bracket


Made in the USA!Made in the USA!
is designed to Wall Mount Support ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Masts. Adjustable for Clamping ANY HDTV Antenna Masts from 1.25 to 3 inches in Diameter. Guy Wire Support for Mast Sections above this mount will still be required. This Bracket will Stand off any Antenna Mast within this Diameter range, but is NOT designed to support the weight and load of any Telescopic Antenna Mast off of the Ground. The Pre-Drilled Set Screw Hole Allows Installer to Install a Customer Provided Set Screw and Mast that Together, Siezes the Mast from Twisting due to Antenna Load, assuring the Antenna remains on Target. Bonding should be made by affixment to Mast. Consult NEC and Applicable Local Code for further guidance. (Mast not included). 
Compare to ROHN R-WM24S and ROHN R-WM24D

 



Specification
Specification Sheet
Spec Sheet spec. sheet




specifications
Standoff 30
Bracket Type Y
Mount Type Single
Manufacturer Easy Up

Images

EZ30-30W_800x600t.jpg
EZ30-30W_800x600t.jpg
 

Accessories