ROHN 25AG 9 Foot (2.00 inch Outside Diameter) Tower Top Cap Section

consists of 16 gauge walls with 5 bays of bracing and swaged, double-bolted connections. The Pinnacle of this Section is Capped with a 16 AWG Tube (2.00 inches O.D.), protruding 8.25 inches above apex of side rails.

This Rohn section is used to top off the 25G tower. The 25AG is available in the standard 9 foot section length. This tower uses double bolted joints which are proven to be the best method of joining tower sections for sturdiness and dependability. Featuring a 12-1/2" equilateral triangular design, the 25AG is constructed of extra heavy duty 1-1/4" steel tubing side rails with continuous solid steel rod bracing. Each 9' section is shipped containing all required nuts and bolts inside one leg. The 25G tower can be used guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. Consult ROHN Catalog Links at Footer Section below for ROHN 25G Tower Details.

Spec. Sheet

This Item Ships LTL Freight ONLY...
Click Here for: What You Want to Know about Shipping!
The 2.00 inch Outside Diameter Mast Tube at the Pinnacle of the Rohn 25AG Top Cap Section means approx. 1 and 13/16 inch Inside Diameter. Further, this Tube is affixed from the ROHN Factory with a 1.25 inch Inside Diameter Tower Mast Bushing on the Top end (ROHN indicates that it can be removed). The bottom end of the Tube is free of attachments, but can have the ROHN TB50 (1.25 inch Inside Diameter) or TB75 (1.50 inch Inside Diameter) peened in to float in and complete your 1.25 inch Outside Diameter or 1.50 inch Outside Diameter Antenna Mast installation onto the R-25AG.

Warranty Sheet