| 24 inch Deluxe Y Wall Mount Antenna Bracket EZ30-24 |
|
Price: $34.95
Availability: Usually ships in 24 Hrs
3S-WM-24 24" Stand-off, Deluxe "Y" Wall Mount with 3rd Leg
 Made in the USA!
For Mounting of CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S and 3S-5994 HDTV Antenna Masts from 1 inch to 1.75 inches in Diameter and up to 10 feet in Height, Standoff from Wall by 24 inches (Mast Not Included)...
|
|
| 5' Foot X 1.25" OD 16 AWG Galvanized Antenna Mast Pole - Swaged | EZ 5-16S |
|
Price: $16.30
Availability: Usually ships in 24 Hrs
EZ 5-16S 5 Foot 16 AWG Swaged Antenna Mast Section
Made in the USA!
This 5 Foot (60") by 1.25" OD 16 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 16 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube, thereby extending the existing mast an additional 5 feet. Manufacturers recommend that masts heights of 10 feet and higher be guyed...
|
|
| ROHN H50 Telescopic Antenna Push Up TV & Wireless Internet Antenna Mast |
|
Price: $189.00
Availability: Usually ships in 24 Hrs
ROHN H50 Foot Telescoping TV Antenna Mast
Made in the USA!
ROHN H50, 5 section Mast extends to about 43 Feet in height that ships to Commercial and Residential addresses alike. Used for Off-Air TV Antenna, Amateur (Ham) Radio, Wireless Internet Antenna, MMDS and Cell Phone Signal Booster Installations (not included)...
This Item Ships LTL Freight ONLY...
|
|
| EZ32A Telescopic Antenna Mast Heavy Duty Base Plate |
|
Price: $21.95
Availability: Usually ships in 24 Hrs
3 Star Inc. EZ32A Heavy Duty Telescopic Mast Ground Mount
Made in the USA!
is designed to support and facilitate grounding for ROHN H20, H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic (Push-up) Antenna Masts. Outer dimensions are 9 x 9 inches...
|
|
| EZ32 Telescopic Antenna Mast Base Plate |
|
Price: $14.95
Availability: Usually ships in 24 Hrs
3 Star Inc. EZ32 Telescopic Mast Base Plate Mount
Made in the USA!
is designed to support and facilitate grounding for ROHN H20, H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic (Push-up) Masts. Outer dimensions are 9 x 9 inches...
|
|
| ROHN Universal Telescopic Push Up Antenna Mast Roof Mount R-ETMB |
|
Price: $70.38
Availability: Usually ships in 24 Hrs
ROHN ETMB Universal Telescopic Push Up Antenna Mast Roof Mount
 Made in the USA!
is designed to facilitate Roof Mounting ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Masts...
|
|
| ROHN 4 inch Heavy Duty Wall Mount Bracket WM4 |
|
Price: $39.00
Availability: Usually ships in 24 Hrs
ROHN WM4 Telescopic Antenna Mast 4 inch "W" HD Wall Mount Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (2) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...
|
|
| ROHN 8 inch Double Mount Antenna Mast Bracket WM8D |
|
Price: $79.00
Availability: Usually ships in 24 Hrs
ROHN WM8D Antenna Mast 8 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...
|
|
| ROHN 12 inch Double Mount Antenna Mast Bracket WM12D |
|
|
Price: $84.00
Availability: Usually ships in 24 Hrs
ROHN WM12D Antenna Mast 12 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...
|
|
| ROHN 18 inch Double Mount Antenna Mast Bracket WM18D |
|
|
Price: $86.00
Availability: Usually ships in 24 Hrs
ROHN WM18D Antenna Mast 18 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...
|
|
