Rohn R10H RSL Tower Section With Legs & Angle Braces
This is a set of (12) 57 inch x 1/8 inch Hot Dipped Galvanized steel Angle braces and (3) 10' 4" U Legs that form the R10HA Section of RSL Angle Bracing Tower
Includes:
12 x 57 inch Angle Braces 1/8 inch
3 x 10 Foot 4 inch U Legs 2-3/4" x 1/4"
Bolt Assy. Kit for Braces
RSL SBK Section Bolt Kit ( Optional )
All three tower legs in each section have provision to install step bolts and a safety climb system. When step bolts are desired, one step bolt kit must be ordered for each section of the tower. Increase the number of step bolt kits accordingly when step bolts are desired on more than one tower leg of a section
U-shaped legs allows for simple lap splice connection .Available in standard and heavy models. Pre-punched holes for attachment of safety climb systems, mounting kits, etc. Braces for each section are the same length, while bolt lengths are standard throughout the tower . Tower material is hot-dip galvanized
This has become the New Standard of Wireless Internet, Utility Line Telemetry, Business Radio, E911 and Local Area Broadcast Communications Tower due to its compact footprint versus height requirements and wind loading. any structure greater than 10 ft requires a climber safety device
The tabulated allowable effective projected areas (EPA) are limited to a maximum recommended value of 80 (ft2). EPA values shown as " - " indicate tower kit is not applicable for the corresponding wind speed. Site-specific designs are available upon request.
ANGLE BRACING CLASS I LOADING
The tabulated allowable effective projected areas (EPA) are limited to a maximum recommended value of 80 (ft2). EPA values shown as " - " indicate tower kit is not applicable for the corresponding wind speed. Site-specific designs are available upon request.
ROHN TT-WG-500 TUF TUG Wire Cable Grab Fall Arrestor System
A Component designed to work within the TUF TUG Safety System. This is a Passive Fall Arrestor Dual Cam Wire Grab that will attach to your Harness and grab the steel strand running length-wise, up and down the Tower that was installed for this purpose...
TTRSL100 Safety Cable System
Rohn RSL (60' - 100') Tower installed Component of the TUF TUG Safety System. With enough fixtures and climbing cable to install on Towers up to 100 foot in height. Does not include Harness or Wire Grab.