NIPPON NF-2 BNC Male to F Female Transition Connector This is plated with an anti-corrosive finish, Commercial Grade and Quality. The BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals, amateur radio antenna connections, aviation electronics (avionics) and many other types of electronic test equipment. It is an alternative to the RCA connector when used for composite video on commercial video devices, although many consumer electronics devices with RCA jacks can be used with BNC-only commercial video equipment via a simple adapter. The F connector is a type of coaxial RF connector commonly used for "over the air" terrestrial television, cable television and universally for satellite television and cable modems, usually with RG-6/U cable or, in older installations, with RG-59/U cable.
Technicians will use this adapter to transition from Antenna, Cable TV and Satellite Feeds to Test Equipment Leads and for common distribution of RF/IF between pieces of Equipment. Compare to Amphenol RF-BNC Connector Series
NIPPON F-71 75 Ohm F Port Terminator This is plated with an anti-corrosive finish, 7/16 " nut of extremely small size for non-security Termination of Unused "F" Ports on Test Equipment and Signal Sources. Terminate open splitter ports to prevent Ingress and Egress of RF Signal... Read More
Holland Electronics VBC In Line Coaxial F Connector DC Voltage Blocking Coupler (1 each/unit) Use this In-Line F connected DC Voltage Filter on any Coaxial Cable line or Equipment with F or F-81 Fitted ends. Perfect for removing DC introduced onto a line to power an In-Line Amplifier and Protect other Splitters / Couplers... Read More
An adapter (or adaptor) is a device used to match the physical or electrical characteristics of two different Connectors so that a connection may be made between them and the Equipment You desire to Cross-Connect. Most Connections for Video and RF (Radio Frequency) Equipment is 75 Ohm in Characteristic Impedance. Radio and Microwave Frequency Connections Passing High Power Require 50 Ohms. A Majority of the Adapters offered Here are 75 Ohm. However, with the High Quality Dialectric Found Surrounding the Interior of the Mating Connection, Low Power Usage, and Transition Impedance Matching of Like Characteristic Impedances, Resulting Mis-match of 50 Ohm use woiuld be so Low as to be Considered Negligible.
APICA AP-BNC-59 RG59 Coaxial Cable to BNC Connector
(1 each/unit) For use with 60%, Tri thru Quad-Shield coaxial cable. Turn Two connectors into One. Go Direct from Cable to BNC. Its unique compression technology turns the integral metal Rings into two robust seals. Uses Compression Tool AP-CT-AS...
APICA AP-BNC-6 RG6 Coaxial Cable to BNC Connector For use with 60%, Tri thru Quad-Shield coaxial cable. Turn Two connectors into One. Go Direct from Cable to BNC. Its unique compression technology turns the integral metal Rings into two robust seals. Uses Compression Tool AP-CT-AS. See the PCT-BNC-6 RG6 BNC Connector Replacements for this Connector... Read More.
3Star CON8003 BNC Male to BNC Male Coupler Connector (1 each/unit) This is a brass body nickel plated finish, gold plated center, Commercial Grade and Quality. When you need to join premade leads both with BNC female connectors... Read More.
3 Star F677TSVV 25' RG-6 QUAD-Shield Coaxial Cable with Connectors When You need 25 Feet of RG-6 Cable for Interior or Exterior Installations and Jumper cables for HDTV Satellite, DTV Antenna Inter-connections between Equipment. Low loss like Quad Shield, more Flexible... Read More.
3Star 208WH BNC Connector Keystone Jack Insert WHITE BNC Type Female Double Barrel Connector Jack Designed to work in conjunction with Keystone wallplates, surface boxes, angled multimedia wallplate or patch panel... Read More.