NIPPON NF-14 BNC Male to BNC Female T Type Transition Adapter This is plated with an anti-corrosive finish, Commercial Grade and Quality. The BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals, amateur radio antenna connections, aviation electronics (avionics) and many other types of electronic test equipment. Using the BNC male to "T" BNC female will facilitate splitting or combining connections to a bulk-head BNC female with more than one pre-made BNC male lead. BNC connectors were commonly used on Test gear and Commercial Grade Video Sources. Some ARCNET networks use BNC-terminated coax.
Technicians will use this transition accomodate several Feeds to Test Equipment Leads or split Commercial Video source signal to distribute to more than one modulator or Scope. Compare to Amphenol RF-BNC Connector Series
An adapter (or adaptor) is a device used to match the physical or electrical characteristics of two different Connectors so that a connection may be made between them and the Equipment You desire to Cross-Connect. Most Connections for Video and RF (Radio Frequency) Equipment is 75 Ohm in Characteristic Impedance. Radio and Microwave Frequency Connections Passing High Power Require 50 Ohms. A Majority of the Adapters offered Here are 75 Ohm. However, with the High Quality Dialectric Found Surrounding the Interior of the Mating Connection, Low Power Usage, and Transition Impedance Matching of Like Characteristic Impedances, Resulting Mis-match of 50 Ohm use woiuld be so Low as to be Considered Negligible.
NIPPON NF-19 BNC Female to BNC Female Coupler Connector This is plated with an anti-corrosive finish, Commercial Grade and Quality. When you need to join premade leads to make a longer one, both with BNC male connectors, you'll want to use this economical coupler to connect the two... Read More.
NIPPON NF-74 BNC Male to BNC Male T Type Transition Adapter This is plated with an anti-corrosive finish, Commercial Grade and Quality with Silver Plate Center Conductor. Mix a couple of signal sources together into some Test Gear or Split a RF, IF or Video source to Feed more than one Monitor.. Read More.
NIPPON NF-2 BNC Male to F Female Transition Connector This is plated with an anti-corrosive finish, Commercial Grade and Quality. The most common Transition from "F" to BNC. Adapt from IF/RF Satellite, Antenna and Cable TV feeds to Test Equipment or Commercial Grade Video Sources... Read More.
NIPPON NF-53 BNC Female to F Female Transition Adapter This is plated with an anti-corrosive finish, Commercial Grade and Quality. When you need to couple premade leads, one with an RCA male and the other with a BNC male, you'll want to use this economical transition to connect the two... Read More.
3 Star F677TSVV 9' RG-6 Tri-Shield Coaxial Cable with Connectors When You need 9 Feet of RG-6 Cable for Interior or Exterior Installations and Jumper cables for HDTV Satellite, DTV Antenna Inter-connections between Equipment... Read More.