NIPPON NF-52 F Male to BNC Female Transition Adapter This is plated with an anti-corrosive finish, Commercial Grade and Quality. The BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals, amateur radio antenna connections, aviation electronics (avionics) and many other types of electronic test equipment. Change the pre-made BNC end of your Test lead into a Coaxial Cable RG F connector to easily extend the lead as long as the cable you make, then add a male BNC.
An adapter (or adaptor) is a device used to match the physical or electrical characteristics of two different Connectors so that a connection may be made between them and the Equipment You desire to Cross-Connect. Most Connections for Video and RF (Radio Frequency) Equipment is 75 Ohm in Characteristic Impedance. Radio and Microwave Frequency Connections Passing High Power Require 50 Ohms. A Majority of the Adapters offered Here are 75 Ohm. However, with the High Quality Dialectric Found Surrounding the Interior of the Mating Connection, Low Power Usage, and Transition Impedance Matching of Like Characteristic Impedances, Resulting Mis-match of 50 Ohm use woiuld be so Low as to be Considered Negligible.
NIPPON NF-53 BNC Female to F Female Transition Adapter This is plated with an anti-corrosive finish, Commercial Grade and Quality. When you need to couple premade leads, one with an RCA male and the other with a BNC male, you'll want to use this economical transition to connect the two... Read More.
Holland Electronics G-F811 F-81 Barrel Connector has advanced the traditional F splice technology with a patented design offering a higher level of electrical and mechanical strength features. DC thru 3 GHz. Use this to connect (splice) two "F" fitted coaxial cable ends together... Read More.
APICA AP-BNC-6 RG6 Coaxial Cable to BNC Connector For use with 60%, Tri thru Quad-Shield coaxial cable. Turn Two connectors into One. Go Direct from Cable to BNC. Its unique compression technology turns the integral metal Rings into two robust seals. Uses Compression Tool AP-CT-AS. See the PCT-BNC-6 RG6 BNC Connector Replacements for this Connector... Read More.
3Star CON8003 BNC Male to BNC Male Coupler Connector (1 each/unit) This is a brass body nickel plated finish, gold plated center, Commercial Grade and Quality. When you need to join premade leads both with BNC female connectors... Read More.
3 Star F677TSVV 25' RG-6 QUAD-Shield Coaxial Cable with Connectors When You need 25 Feet of RG-6 Cable for Interior or Exterior Installations and Jumper cables for HDTV Satellite, DTV Antenna Inter-connections between Equipment. Low loss like Quad Shield, more Flexible... Read More.
Holland Electronics HR S2 2-Way 15-2150 MHz Power Passing Satellite TV Splitter 15-2150MHz Wideband Satellite TV Signal Splitter with all Ports Power passing to Split your LNB(F) and combined Off-Air TV Antenna feed into 2 feeds for separate Receiver locations...
Read More.