Holland FAMP-3HR 3 dB Power Passing In Line Attenuator
3 dB Power Passing F type In-line attenuators can be inserted in coaxial cable feeds to reduce signal levels up to 3 GHz. in Frequency with High Return Loss. Reduce UHF/VHF/FM and Digital signal sources such as TV Antennas, Cable TV, Broadband Internet, FM Antenna and Satellite TV (with DC Voltage being present!). Combinations of attenuators may be used in conjunction to add up to the exact signal loss needed.
For non Power Passing Applications, please use the FAM-*HR version also listed in this category and save money.
There is such a thing as too much signal sometimes. Receivers of all kinds require signal present within a specific window range for proper operation. Sometimes forcing an Impedance match is the best way to maximize power delivery to Load. This attenuator passes voltage safely in addition to padding down signal.
In-Line Attenuators that can Drop Signal Down to Acceptable Levels and Force Impedance match. Some are Power Passing. Most Attenuators Now-a-Days are made of Integrated Circuit Equivalents of Resistors and Capacitors that made up the RC Networks of Yesterdays Pads. Because of this Fact, You will Find that the Actual Loss may vary across the Bandwidth for different reasons and values as compared to Yester-Years Models. I have always found it best to add Attenuation in Increments until reaching the appropriate amount, and then substituting for the Total Value with ONE Pad of equal value. Multiple Attenuators in Series may have Un-predictable and Un-controllable Affects upon each other in Reactance, and are Prone to RF Leakage as Stress upon the Connectors may Compromise the Shield Integrity.
Holland Electronics VBC In Line Coaxial F Connector DC Voltage Blocking Coupler (1 each/unit) Use this In-Line F connected DC Voltage Filter on any Coaxial Cable line or Equipment with F or F-81 Fitted ends. Perfect for removing DC introduced onto a line to power an In-Line Amplifier and Protect other Splitters / Couplers... Read More.
Holland HPF-54HR High Pass Return Blocking Filter
(1 each/unit) This In-Line F Connectorized Filter attenuates ingressive noise in the sub-band section of the cable spectrum by blocking 5 to 45 MHz. This also prevents the return channel of Set-top Converter boxes from communicating with the Office...
NIPPON F-71 75 Ohm F Port Terminator This is plated with an anti-corrosive finish, 7/16 " nut of extremely small size for non-security Termination of Unused "F" Ports on Test Equipment and Signal Sources. Terminate open splitter ports to prevent Ingress and Egress of RF Signal... Read More.
NIPPON NF-2 BNC Male to F Female Transition Connector This is plated with an anti-corrosive finish, Commercial Grade and Quality. The most common Transition from "F" to BNC. Adapt from IF/RF Satellite, Antenna and Cable TV feeds to Test Equipment or Commercial Grade Video Sources... Read More.
NIPPON NF-1 Push On F Male to F Female Transition Connector This is plated with an anti-corrosive finish, Commercial Grade and Quality. Easily slip-on and slip-off test equipment leads to Bulk-head F-81 Female F connectors like those found on Test points and Outputs of Amplifiers and modulators... Read More.
3 Star F677TSVV 25' RG-6 QUAD-Shield Coaxial Cable with Connectors When You need 25 Feet of RG-6 Cable for Interior or Exterior Installations and Jumper cables for HDTV Satellite, DTV Antenna Inter-connections between Equipment. Low loss like Quad Shield, more Flexible... Read More.