Holland VBC In Line Coaxial F Connector DC Voltage Blocking Coupler (1 each/unit) Use this In-Line F connected DC Voltage Blocking Coupler on any Coaxial Cable line or Equipment with F or F-81 Fitted ends. Perfect for filtering out / removing DC Voltage and current (up to 35 VDC and .750 A) introduced onto a line to power an In-Line Amplifier and Protect other Splitters / Couplers, yet passes Satellite Cable TV Antenna signal up to 3 GHz in Frequency. Install this Voltage Blocking Coupler anywhere on the line at the point where you want to Block DC Voltage from going farther. Protect Test Equipment, Splitters, Couplers, Antennas, TV's, In-Line Attenuators, Power Inserters, Power Supplies, Amplifiers and other Equipment from Damage.
Compare to Pico Macom VBC and VBC-HRL
Filters that are typically Notch (Channel Removal), Band Pass (Pass Specific Range) or Pass Band (Pass all BUT a Specific Range). If Installing a Filter that will affect an entire Network, it is best to install at Amplifier Input versus Output. Notch Filters are part of but not completely effectual alone for Channel Elimination. Common Band Pass and Pass Band Filter examples are Diplexers and Separators. Very Few Filters handle Voltage Pass, be Carefull to ascertain their Capability prior to Use.
Holland Electronics LA-2150H HDTV DTV Digital Satellite Amplifier 950 to 2150 MHz This high-output line amplifier has been specifically designed for satellite systems with a frequency range of 950 to 2150 MHz. Perfect Amplifier for In-Line F connection to overcome excessive Satellite Dish cable lengths and Splitter loss... Read More.
Holland Electronics LA-520 HDTV DTV Digital Off Air CATV + Satellite Amplifier 50 to 2050 MHz Our most versatile 20 dB In-line amplifier with wideband capabilites from 50 to 2050 MHz. for amplifying Off-Air TV or Cable TV Signals in addition to Satellite Signals that may be mixed together. Counter excessive Cable and Splitter losses...
Read More.
NIPPON NF-2 BNC Male to F Female Transition Connector This is plated with an anti-corrosive finish, Commercial Grade and Quality. The most common Transition from "F" to BNC. Adapt from IF/RF Satellite, Antenna and Cable TV feeds to Test Equipment or Commercial Grade Video Sources... Read More.
Holland FAM-3 dB In Line Pad Attenuator
3 dB to 3 GHz. F Connector type In-line attenuator can be coupled in Satellite, Antenna and Cable TV feeds to reduce signal levels. For use on Lines without Voltage...
Holland FAM-3HR 3 dB In Line Attenuator with Hi Return Loss
3 dB High Return Loss F Connector type In-line attenuator can be coupled in Satellite, Antenna and Cable TV feeds to reduce signal levels up to 3 GHz. For use on Lines without Voltage...
3 Star F677TSVV 3' RG-6 Tri-Shield Coaxial Cable with Connectors When You need 3 Feet of RG-6 Cable for Interior or Exterior Installations and Jumper cables for HDTV Satellite, DTV Antenna Inter-connections between Equipment... Read More.