EZ-PNP Non-penetrating Satellite Dish Pitched Roof Mount
Made in the USA!
is constructed of Pre-Galvanized Steel and uses standard concrete blocks to anchor. Base Plate Footprint is 9 x 6 inches, that Accommodates a wider Ranger of Foot-Plates. For use with DBS, Antenna and Satellite Internet systems where Penetration of the Roof or Mounting with Hardware is NOT an Option! (Dish Not Included). As with all 2nd source hardware, minor Field drilling may be required to attach in your particular installation scenario.
This Non-Penetrating Mount Series from Easy UP is constructed with Heavy Duty steel construction that blends well with residential environments. As with all Ballast mounts, Structural Engineering consultations are recommended for all Roof Applications.
FRM-MAT Satellite Dish Non-penetrating Roof Mount Rubber Protective Mat
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/32 thick Pad measures roughly 36 wide by 42 inches long, trims neatly, place underneath Frame of Non-Penetrating mount, on top of Roof surface...
Designed for wall or roof mounting most Off-Air Antenna and DirecTV, DISH Network Dishes up to 20" in Diameter...
DS-3000 Universal Home "J" Dish Off-Air Antenna Mount
Designed for wall or roof mounting most Off-Air Antenna and DirecTV, DISH Network Dishes up to 20" in Diameter...
3 Star 5992S 1.66 O.D. Steel Satellite Dish Swaged Ground Pole Mast
Ideal as a DISH500 and DIRECTV Dish Antenna Mast (will NOT work for DIRECTVs SL3/5) for Ground or Wall mount Installation (Mount Not Included)...
Rohn's RSL Towers have options to purchase the complete tower grounding kit. This category contains parts and full kits. Everything you need in one place for properly grounding a RSL Tower. The image below is a diagram of a typical grounding setup for 3 legs. We recommend consulting with an engineer or contractor to help in deciding how to properly ground the RSL tower for your application and to meet any possible local code requirements.