Call: (407) 944-8856

5' Foot X 1.25" OD 16 AWG Galvanized Antenna Mast Pole - Swaged | EZ 5-16S

EZ 5-16S 5 Foot 16 AWG Swaged Antenna Mast Section

Made in the USA!

This 5 Foot (60") by 1.25" OD 16 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 16 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube such as the EZ5-16 or the 1-1/4 16 gauge top-most tube section of telescopic antenna mast, thereby extending the existing mast an additional 5 feet. Sections can be Coupled Together as to Increase Height. Manufacturers recommend that masts heights of 10 feet and higher be guyed or provided additional Support. Fits a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.

Note:

There's a Big difference between 18 AWG and 16 AWG when it comes to Antenna Masts. This 16 AWG Mast is thicker, hardier, stronger and weighs more with heavier Pre-Galvanization. The swaged end fits tightly into another mast when it's 16 AWG like this one (I can't pull them apart, bolt them together for a permanent joint). When considering the longevity of your HDTV Off-Air TV Antenna, there's no substitute for the strength of this mast in effectively transfering the Wind Load from the Antenna to the Mount in preventing the mast from Folding over. The 18 AWG painted masts just don't hold up. Be Sure and afford yourself 2 feet minimum, up to 1/3 of the overall mast length between the two wall mounts you would utilize in your TV antenna Installation. The Torque applied from wind load through cantilever to these mounts can be significant. This is one reason we no longer offer the 18 AWG masts such as the Channel Master CM-1805 or Cm-1810.

EZ5-16S 5 Foot by 1.25" OD 16 AWG Swaged Antenna Mast

2 inch W type Antenna Mast Wall Mount Bracket 3S-WM2 - $10.95

3S-WM2 "W" Type Heavy Duty Antenna Mast 2 inch Wall Mount Bracket

Made in the USA ( Holds Masts from 1 to 2.00" in Diameter ) is designed to provide supplemental Wall Mount Support for ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast like the CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S, 3S-5999 and 3S-5994 from 1 to 2.00 Inches in Diameter (Mast not included). Set of (2) comes with Installation Hardware. Guy Wire Support for Mast Sections 10 Feet and greater above this mount will still be required...

3 inch wall mount bracket for Telescopic TV Antenna Mast - $9.95

SKY 32811 Telescopic TV Antenna Mast Heavy Duty 3" Wall Mount Bracket
is designed to provide supplemental Wall Mount Support with 3 inch standoff for ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.5 Inches in Diameter (Mast not included). Set of (2) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required...

4 inch Heavy Duty Antenna Mast Wall Mount Bracket - $9.95

SKY 32812 Heavy Duty Antenna Mast 4 inch Wall Mount Bracket
is designed to provide supplemental Wall Mount Support for ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast like the CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S, 3S-5999 and 3S-5994 from 1 to 2.25 Inches in Diameter (Mast not included). Set of (2) comes with Installation Hardware. Guy Wire Support for Mast Sections 10 Feet and greater above this mount will still be required...

6 inch TV Antenna Wall Mount Y Bracket 3S-WM6 - $10.82

3S-WM6 6" Stand-off, Deluxe "Y" TV Antenna Mast Wall Mount

Made in the USA! ( Holds masts from 1" to 1.75" in Diameter )

For Mounting of CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S and 3S-5994 HDTV Antenna Masts from 1 inch to 1.75 inches in Diameter and up to 10 feet in Height, Standoff from Wall by 6 inches (Mast Not Included)...

8 inch Deluxe Y Wall Mount Antenna Bracket 3S-WM8L - $16.95

3S-WM8L 8" Stand-off, Deluxe "Y" Wall Mount with 3rd Leg
Made in the USA!
For Mounting of CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S and 3S-5994 HDTV Antenna Masts from 1 inch to 1.75 inches in Diameter and up to 10 feet in Height, Standoff from Wall by 8 inches (Mast Not Included)...

ROHN 12 inch Double Mount Antenna Mast Bracket WM12D - $84.00

ROHN WM12D Antenna Mast 12 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...

ROHN 18 inch Double Mount Antenna Mast Bracket WM18D - $86.00

ROHN WM18D Antenna Mast 18 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...

24 inch Deluxe Y Wall Mount Antenna Bracket EZ30-24 - $34.95

3S-WM-24 24" Stand-off, Deluxe "Y" Wall Mount with 3rd Leg

Made in the USA!
For Mounting of CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S and 3S-5994 HDTV Antenna Masts from 1 inch to 1.75 inches in Diameter and up to 10 feet in Height, Standoff from Wall by 24 inches (Mast Not Included)...

3 Foot Tripod for Antenna Mast - 1.25" OD (2 Bolts) - $28.60

EZ 22-3 3 Foot Roof Mount Tripod for Antenna MastHolds masts up to 1.5" diameter. Made of 1"OD- 18 gauge galvanized tubing. Spread 32" Mast supported by 2 bolts. Mast not included. Made in America.

5 Foot Heavy Duty Double Braced Tripod Mount for Antenna Mast - $79.95

Heavy Duty Roof Mount Tripod for Antenna Mast - 3S-6046

5 Foot Heavy duty double braced Tripod holds mast up to 2.00" inch O.D., a universal mast clamp and has installer friendly front facing feet with outer legs lining up at 48 inches (3 x 16) and the center leg at 24 inches from either outer leg...

Rate this product.

Product isn't rated yet. Write a review.

RG59 Siamese with Messenger , is the choice for CCTV installations. Make your installations easier by carrying video signal and power to your equipment.Power Wire Included

The cable features an 18 AWG power cable siamesed to the outside of the coax.

Construction

The 95% Copper Clad Aluminum Braid protects the Video signal from external EMI and RFI. Same Solid Bare Copper (SBC) Center Conductor, but Pay less with 95% Copper Clad Aluminum Braided shield. The outside of the cable uses PVC with added UV inhibitors. for great overall performance. This wire is also messengered for easy pole to pole, building to building aerial installation.