17A01 3/16" Guy Strain Ceramic Insulator
Is a ceramic strain insulator for a 3/16" wire. It has a 5/16" hole with 2-5/16" length and a diameter of 1-3/8". GuyLine Insulators are used to divide guy wires into non-resonant sections. This prevents the guy lines from altering the antenna's radiation pattern due to near-field interaction. A compression-type design is used and the insulator is compressed within the wire loops, so that if the insulator should break, the guy wires are still attached. Breaking strength for these insulators is 10,000 pounds.
Tower Guy Wire Tension Guide The recommended initial tension in guy wires is 10% of their ultimate tensile strength. There are two different grades of steel used for good guy line (clothes line does not count), HS (high strength) and EHS (extra high strength). The Rohn manual gives the following info on 3/16 and 1/4 in cable.
1. 3/16" Guy Strain Ceramic Insulator - $7.95 | 2. 40 Ft Aluminum Heavy Duty Tower Kit HD 35-40 - $2,416.00 |
3. TFC Tri-Shield 77% RG6 Cable with Messenger Wire 1000 FT - $84.00 | 4. 7/16 6x25 EIP IWRC RRL Wire Rope by the Foot - $3.95 |