Printer View Tell a Friend

Non-Penetrating Roof Mount 30" Mast with 1.66" O.D.

Highlights

30" Mast
1.66" O.D.
Off-Air Antennas
Satellite Dishes

Bulk Quantities Available Here!

Price: $99.56
Manufacturer Code: VMP-FRM166
Qty:
Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere

VMP FRM166 Non-Pen Roof Mount with 1.66" O.D. Mast 30" Length


is constructed of steel and uses standard concrete blocks for Ballast on Flat Roof. Mast is 30 inches in Outside Diameter and 30 inches in Height from Base. For use with DBS, antenna and satellite internet systems. Can be Used as a Penetrating Mount without Ballast. Compares to Other Name Brand Hardware at Half the Price.
 
This Non-Penetrating Mount Series from VMP is finished with a dark brown weather resistant powder coat inside and out that blends well with residential environments. The Standard is a 1.66 or 1-5/8 inches Diameter Pipe size in most Universal Mounts for Satellite Dishes. Whether Aftermarket or Service Provider supplied, this mount can accomodate even large Dishes for DirecTV (1 and 3 LNB only, the World Direct International uses 1.75" DIA Mast and the Ka/Ku HD Band uses 2" DIA Mast), Dish Network 500+/1000+, Dish 500 Plus, Dish 1000 Plus, DishPLUS, Dish Network TurboHD 1000.4, Dish 1000.2, Dish Network 1000.4, DishPro, 105 SuperDISH, 121 SuperDISH, EchoStar Technologies Corporation, most FTA Free to Air and DBS Direct Broadcast Satellite Dishes that use the same Diameter Mounting Tube for mounting Dishes up to 39 inches. In addition, it can be used in mounting some smaller PCS, Cellular, Broadband Wireless, Wireless Internet and Two Way Antennas. I have enjoyed Installing this product line for Dish applications from Business and Internet on the tops of tall buildings to HD TV and zillions of channels for in-home use. And as with all items in this Product Line, Screws and Pitch Pads are included for Bolt-down versus Ballast applications. The Length of the mast is 30 inches based on engineering that incorporates consideration for typical Satellite Antenna Wind-load versus the Ballast that would keep either on target with minimal deviation and flex. As with all Ballast mounts, Structural Engineering consultations are recommended for all Roof Applications.
Specification Sheet
Spec Sheet
manufacturer
VMP
Non-Penetrating Roof Mount for Dish Network and DirecTV Dish Mounting EZ46-3 Pitch Pad Kit with Screws - $3.95
EZ 46-3 Pitch Pad Kit with Screws
Made in the USA!Made in the USA!
Complete with (3) 3 x 1.5" Moisture Barrier Pitch Pads and (6) 2 x 1/4" Hex Head Integral Washer Lag Screws for Weather-Proof Bracket Mounting to Exterior Surfaces. Most popular screw size for the majority of Antenna Mast Bracket Installations..

Read More
Non-Penetrating Roof Mount for Dish Network and DirecTV Dish Mounting Protective Rubber Mat Layer for Non-Penetrating Antenna Roof Mount - $22.95

 FRM-MAT Satellite Dish Non-penetrating Roof Mount Rubber Protective Mat
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/32 thick Pad measures roughly 36 wide by 42 inches long, trims neatly, place underneath Frame of Non-Penetrating mount, on top of Roof surface...

Read More
Product isn't rated yet. Write a review.

Flat Roof Non-Penetrating Mounts

These mounts can be used where penetrating its attachment is not an option. Non penetrating mounts use a balasest like your usual cement cinder block as a method to hold down your masting structure. They can help meet the variety of communication tower needs such as Cellular, PCS, Wireless Cable, Microwave, Wireless Internet, WiFi Hot Spots, DBS, MDS, MMDS and UHF/VHF reception.

Designed and engineered to handle the job of getting above ground interference, each non-penetrating roof mount has been researched and developed to serve a specific purpose.

With professionally engineered construction, you can be assured you're getting a virtually maintenance-free product built to the highest standards. And because our non-penetrating roof mounts are hot-dip galvanized after fabrication, our mounts won't rust.

    Additional Features Include
  • Offer both Fixed Mounts and Ballast Roof Mounts
  • Pre-Galvanized for corrosion protection
  • Varied mast heights available
  • Varied mast pipe O.D. available
  • Quickly shipped and quickly assembled
  • Minimum bolted connections
  • Engineering ballast tables available
  • Optional roof pads and mats available
  • All models are UPS shippable

Products   Recently Viewed
My Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!