Printer View Tell a Friend

Non-Penetrating Roof Mount for Light Antennas EZ NP-60-125


EZ NP Base

60" - 1.25" Mast

60" x 1.25" Swaged Add On 


Price: $96.00
Manufacturer Code: EZ NP-60-125
Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere
Easy Up EZ NP-60-125 Non-Penetrating Roof Mount with 1.25" OD x 60" Antenna Mast Pole
Made in the USA!Made in the USA!
Ideal for Light Off-Air TV and Wireless Internet Antenna mounting, is constructed of pre-galvanized steel, uses 6 standard concrete blocks to anchor, 29 x 35.5" base, with 1.25" mast 60" in length. For light antenna loads needing 10 feet in height, use this mount in combination with (2)EZ 5-16S swaged 1.25" OD masts, several EZ 50 turnbuckles, some 620 guy wire and the EZ 43-A Guy Ring! (available separately) Also can be used as a Non-Penetrating base for an H20 or H30 Telescopic mast, though Down Guys will still be required as per Factory recommendations.

Note: Height and Antenna Loading capability are dependant upon ballast weight. You need to Consult an Engineer to determine the Load Bearing Capability of the roof that you are entertaining such an Installation . It is Important to choose a Mount and Mounting Location with a Picture of the Finished Installation in Mind. Be Sure to First select a location that lends itself to applying a Load without Compromising the Integrity of the Material you affix to. Most Decorative Finishes most often do not have the Strength to Hold a Weight or Pressure without fail. Further, Think about what's underneath the exterior. Is it stronger, or will it yield to Pressure over time also? Weather Proof the Installation to Maintain the Integrity of your Home. Next consider the Location over a Lifetime of Adjustments, does it lend itself to modifications in Height or Direction? Larger Antennas increase the surface area presented to air movement, Hence, Wind-load does increase. As the length of the mast increases from Its last attached point on the structure, the torque applied in cantilever also increases with Weight and Wind-Load, requiring a more substantive attachment and Load-Bearing material. Keep the Distance Minimal from the Antenna to the TV's and Equipment you feed, as to minimize loss and the need for Amplification.
Specification Sheet
Easy Up
Product isn't rated yet. Write a review.

Maintenance Free Non-Penetrating Roof Mounts

3 Star Inc's non-penetrating roof mounts meet a variety of communication tower needs. Our mounts will work for cellular, PCS, wireless cable, microwave, wireless internet, WiFi hot spots, DBS, MDS, MMDS and UHF/VHF reception.

Our non-pen roof mounts are designed and engineered to handle the job of getting above ground interference. Each mount has been researched and developed to serve a specific purpose.

Our non-penetrating roof mounts are either pre-galvanized or powder coated after fabrication meaning our roof mounts won't rust. With professionally engineered construction, you can be assured you're getting a virtually maintenance-free product built to the highest standards.

Non-pen mount features include:

  • Offer both Fixed Mounts and Ballast Roof Mounts.
  • Pre-galvanized for corrosion protection.
  • Varied mast heights available.
  • Varied mast pipe O.D. available.
  • Quickly shipped and quickly assembled.
  • Minimum bolted connections.
  • Engineering ballast tables available.
  • Optional roof pads and mats available.
  • Some models are UPS shippable.

Products   Recently Viewed
My Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!