3 Star Inc ADV1007 Advantage BNC RJ45 RJ11 Cat5e Cat6 LAN and Telephone Line Wiring Tester
This RJ45/RJ11 Cable Tester quickly and easily checks for cable continuity, mis-wiring, open, short, straight-through or cross-pinning to each station from point to point. Will test 4 Pair Cat5e and Cat6 twisted cables using RJ45, RJ11, and BNC connectors wired for LAN (TIA/EIA-568-A) or Telephone jacks. Check USOC, 8P8C, 6P6C and 4P4C modular connections. Works up to 1000 Foot with remote.
Note: There's nothing worse than having to scramble back over to a Customer's job and check why the LAN Ports or Telephone system Stations aren't working, only to find out that someone wired or jacked-out the stations wrong. Then the customer and his IT team are sitting, watching you while your fixing it, wondering what else will go wrong. Because from that point forward, any issues will automatically be assumed to be your fault, and they will call you before they bother trouble-shooting it. This ADV1007 Tester is a way to not only find and fix mis-wired jacks and ports, but prevent your customer from finding them before you do. Simple and Light-weight, just plug the Master in at the Block and have your guy got to each RJ11 and RJ45 jack to make sure that the wiring is correct. Avoid confusion and wiring faults with T568A & T568B Jacks, have confidence knowing that when your customer installs their LAN Router, Server and local Telco switch, everything should work, and if it doesn't; at least you can eliminate the premise wiring and jacks as being the culprit. I always test my wiring RJ11 and RJ45 jacks as I verify the labeling on the wall-plate and the punch down Blocks as my final QC. Test Modular cables, T568A & T568B wiring, and BNC cabling quick and easy up to 100 feet.