Call: (407) 944-8856

EZ TM-50-U-95 Telescopic Antenna Push Up TV & Wireless Internet Antenna Mast - UPS Shippable

3 Star Inc. EZ TM-50-U-95 33.2 Foot Telescoping Antenna Mast

Made in the USA!

5 section 16 gauge inner, 18 gauge outers, Mast collapses down to 95" inches in length that with overlapping, extended mast length is 33 Ft 2 inch , Used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas (not included)...

Mast Section Dimensions are:

(1) 94" length x 1.25" OD (16 AWG) Top Mast Pipe
(2) 92" length x 1.50" OD (18 AWG)
(3) 88" length x 1.75" OD (18 AWG)
(4) 88" length x 2.00" OD (18 AWG)
(5) 88" length x 2.25" OD (18 AWG)

This Item Ships UPS Brown!

Note:

Installation Guidelines:

Installation or dismantling of telescoping masts require professional contractors experienced with guyed masts.
All installations must be bracketed or guyed.
The pictured guy wire kit layouts are for a typical installation. Individual installation requirements may vary.
Antenna load (top load) should not exceed an effective projected area (EPA) of 2 square feet (see your antenna specifications).

Specification Sheet

Install Sheet

Installations

height

50

manufacturer

Easy Up

options

UPS Shippable

View Larger Image

EZ TM-50-U-95 Telescopic Antenna Push Up TV & Wireless Internet Antenna Mast - UPS Shippable

50 Foot Telescopic Antenna Mast 3 Way Down Guy Wire Kit - $282.00

H503WAYGUY Telescopic Antenna Mast Down Guy Wire and Anchor Kit
is designed to Securely 3 way Guy at 5 levels your ROHN H50 and Channel Master 1650, 1850 Telescopic Push Up Antenna Masts. Choose Guy wire gauge and Anchor size. Mast is not included...

50 Foot Telescopic Antenna Mast 4 Way Down Guy Wire Kit - $325.00

H504WAYGUY Telescopic Antenna Mast Down Guy Wire and Anchor Kit
is designed to Securely 4 way Guy at 5 levels your ROHN H50 and Channel Master 1650, 1850 Telescopic Push Up Antenna Masts. Choose Guy wire gauge and Anchor size. Mast is not included...

4 inch Heavy Duty Antenna Mast Wall Mount Bracket - $9.95

SKY 32812 Heavy Duty Antenna Mast 4 inch Wall Mount Bracket
is designed to provide supplemental Wall Mount Support for ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast like the CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S, 3S-5999 and 3S-5994 from 1 to 2.25 Inches in Diameter (Mast not included). Set of (2) comes with Installation Hardware. Guy Wire Support for Mast Sections 10 Feet and greater above this mount will still be required...

12 inch Telescopic TV Antenna Mast Wall Mount Bracket 3S-WM12W - $23.50

3S-WM12W Telescopic TV Antenna Mast 12" Wall Mount Bracket

Made in the USA!
is designed for Wall Mount Support of ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up TV Antenna Masts or ANY Mast from 1.25 to 3 inches in Diameter (Mast not included). Guy Wire Support for Mast Sections above this mount will still be required...

18 inch Telescopic TV Antenna Mast Wall Mount Bracket 3S-WM18W - $28.40

3S-WM18W Telescopic TV Antenna Mast 18" Wall Mount Bracket

Made in the USA!
is designed for Wall Mount Support of ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up TV Antenna Masts or ANY Mast from 1.25 to 3 inches in Diameter (Mast not included). Guy Wire Support for Mast Sections above this mount will still be required...

24 inch Deluxe Y Wall Mount Antenna Bracket EZ30-24 - $34.95

3S-WM-24 24" Stand-off, Deluxe "Y" Wall Mount with 3rd Leg

Made in the USA!
For Mounting of CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S and 3S-5994 HDTV Antenna Masts from 1 inch to 1.75 inches in Diameter and up to 10 feet in Height, Standoff from Wall by 24 inches (Mast Not Included)...

30 inch Telescopic TV Antenna Mast Wall Mount Bracket - $24.95

3S-WM-30W Telescopic TV Antenna Mast 30" Single Wall Mount Bracket

Made in the USA!
is designed for Wall Mount Support of ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up TV Antenna Masts or ANY Mast from 1.25 to 3 inches in Diameter (Mast not included). Guy Wire Support for Mast Sections above this mount will still be required...

EZ32 Telescopic Antenna Mast Base Plate - $14.95

3 Star Inc. EZ32 Telescopic Mast Base Plate Mount
Made in the USA!
is designed to support and facilitate grounding for ROHN H20, H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic (Push-up) Masts. Outer dimensions are 9 x 9 inches...

EZ32A Telescopic Antenna Mast Heavy Duty Base Plate - $21.95

3 Star Inc. EZ32A Heavy Duty Telescopic Mast Ground Mount
Made in the USA!
is designed to support and facilitate grounding for ROHN H20, H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic (Push-up) Antenna Masts. Outer dimensions are 9 x 9 inches...

EZ32C Telescopic Antenna Mast Heavy Duty Base Plate - $24.95

3 Star Inc. EZ32C Heavy Duty Telescopic Mast Ground Mount
Made in the USA!
is designed to support and facilitate grounding for ROHN H20, H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic (Push-up) Antenna Masts. Outer dimensions are 9 x 9 inches with 6 inch tall collar...

ROHN Universal Telescopic Push Up Antenna Mast Roof Mount R-ETMB - $70.38

ROHN ETMB Universal Telescopic Push Up Antenna Mast Roof Mount
Made in the USA!
is designed to facilitate Roof Mounting ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Masts...

Complete Grounding Kit for Telescopic Masts - $29.95

3 Star's Telescopic Mast Grounding Kit
Universal grounding kit for telescopic masts include ground rod, ground wire and grounding block...

ROHN 4 inch Heavy Duty Wall Mount Bracket WM4 - $39.00

ROHN WM4 Telescopic Antenna Mast 4 inch "W" HD Wall Mount Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (2) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...

ROHN 8 inch Double Mount Antenna Mast Bracket WM8D - $79.00

ROHN WM8D Antenna Mast 8 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...

ROHN 12 inch Double Mount Antenna Mast Bracket WM12D - $84.00

ROHN WM12D Antenna Mast 12 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...

ROHN 18 inch Double Mount Antenna Mast Bracket WM18D - $86.00

ROHN WM18D Antenna Mast 18 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...

ROHN 24 inch Double Mount Antenna Mast Bracket WM24D - $88.00

ROHN WM24D Antenna Mast 24 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...

Rate this product.

Product isn't rated yet. Write a review.

Professional Grade Telescopic Push Up Poles for Digital TV, Wifi Antenna & Weather Sensors.

We stock the highest quality telescopic masts made from 18 and 16 AWG galvanized steel right here in the USA. These push up poles are suitable for tons of applications where a fast an simple extension is needed. They have been used for everything from digital TV antenna applications to wireless communications to weather stations and even IoT Sensors. The masts can be used retracted or fully extended and anywhere in between. They can be supported and mounted against a structure, mounted on a roof or even guyed in the middle of a field. Our reliable and durable telescopic poles come in heights of 20, 30, 35, 40 and 50 FT and all have a engineered thumbscrew/collar system for setting height.

Note:

These telescoping masts are not recommended for commercial, CB or beam antenna installations.

Antenna load (top load ) should not exceed an effective projected area ( EPA ) of 2 square feet ( see your antenna specifications

Looking for just a simple mast pipe? View our similar antenna mast poles for lengths ranging from 5 FT to 10 FT and our variaty of telescopic mast mounts to complete your next installation.