Printer View Tell a Friend

5' Foot X 1.25" OD 16 AWG Rohn HDG Antenna Mast Pole 160505PHS

Highlights

5 feet Long
1.25 inch O.D.
HDG Galvanized Finish
UPS Shippable
16 AWG Thickness

Non Swaged End

 

 

 

 

Bulk Quantities Available Here!

Price: $16.00
Manufacturer Code: 160505PHS
Qty:
Availability: Usually ships in 24 Hrs
Shipping: Can ship anywhere

Rohn 5-16 5 Foot 16 AWG HDG   Antenna Mast Section


Made in the USA!Made in the USA!

 

This Rohn 5 Foot (60") by 1.25" OD 16 AWG Non-swaged end Antenna Mast tube is Hot Dipped Galvanized for weather resistent .Can be used with 160505GHS swaged mast to extend any 1-1/4 inch 16 gauge antenna masts by fitting the swaged end of this mast into the open notched end of the other mast  or the 1-1/4" 16  gauge top-most tube section of telescopic antenna mast, thereby extending the existing mast an additional 5 feet. Sections can be Coupled Together as to Increase Height. Manufacturers recommend that masts heights of 10 feet and higher be guyed or provided additional Support. Fits a Variety of Mounts for Flexibility In Antenna Mounting and Height Clearance.

 


Note:

: There's a Big difference between 18 AWG and 16 AWG when it comes to Antenna Masts. This 16 AWG Mast is thicker, hardier, stronger and weighs more with heavier Pre-Galvanization. The swaged end fits tightly into another mast when it's 16 AWG like this one (I can't pull them apart, bolt them together for a permanent joint). When considering the longevity of your HDTV Off-Air TV Antenna, there's no substitute for the strength of this mast in effectively transfering the Wind Load from the Antenna to the Mount in preventing the mast from Folding over. The 18 AWG painted masts just don't hold up. Be Sure and afford yourself 2 feet minimum, up to 1/3 of the overall mast length between the two wall mounts you would utilize in your TV antenna Installation. The Torque applied from wind load through cantilever to these mounts can be significant. This is one reason we no longer offer the 18 AWG masts such as the Channel Master CM-1805 or Cm-1810.

5' Foot X 1.25" OD 16 AWG Rohn HDG Antenna Mast Pole 160505PHS Adjustable 3-Way Down Guy Ring for 1-1/4" Antenna Mast - $8.95

EZ 43-A Adjustable 3-Way Down Guy Ring
Made in the USA!Made in the USA!
Adjustable mount Down Guy Ring, for 3-Way guying of Antenna masts with Screw Eye Bolts to affix 620 guy wire, Fits Masts up to 1 1/4" (Mast and Wire Not Included)...

Read More
5' Foot X 1.25" OD 16 AWG Rohn HDG Antenna Mast Pole 160505PHS 5' Foot X 1.25" OD 16 AWG Galvanized Antenna Mast Pole | EZ 5-16 - $16.00

EZ 5-16 5 Foot Galvanized
Made in the USA!Made in the USA!
This is a 5 Foot (60") by 1.25" OD 16 AWG Galvanized Antenna Mast (Mount Not Included)...

Read More
Product isn't rated yet. Write a review.

Selecting Antenna Mast Pipe?

Selecting the proper antenna mast pipe is crucial. Depending on the size of your antenna, it's EPA, weight and height all play a factor in selecting a supportive pole. When planning, it's best to have all the information you can get like outside diameter of your attaching method, the clearance of gutters, siding or other obstacles in the path of your erecting a mast or tower. 

Here you will find standard straight pipe in 5' foot and 10' foot lengths. You can also find those same pipes with a special end called a swag. A swaged ended pipe allows you to attach several lengths of pipe together. 

Swaged EndStraight End

   When selecting a pipe you will need to know the length, OD (outside diameter), the AWG 16 or 18 (the smaller the number the thicker the steel) and weather you'll need any swaged ended pieces. You'll then need to select the proper mounting such as wall, roof or maybe a tripod

Products   Recently Viewed
My Cart
Credit Cards Taken
Your shopping cart is empty!
We Ship Fast!
Your Orders leave Daily! UPS... What can Brown do for You?!United States Postal ServiceR+L Carriers... Value Added Advantages!